Service Management Tasks; Modifying Or Deleting An Mda - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Service Management Tasks

Service Management Tasks
This section discusses basic procedures of the following service management tasks:
•
•
•
•

Modifying or Deleting an MDA

To change an MDA type already provisioned for a specific slot/card, first you must shut down the
slot/MDA/port configuration and then delete the MDA from the configuration.
Use the following CLI syntax to modify an MDA:
CLI Syntax: config> port port-id
CLI Syntax: config> card slot-number
Page 156
Modifying or Deleting an MDA on page 156
Modifying a Card Type on page 157
Deleting a Card on page 157
Deleting Port Parameters on page 157
shutdown
shutdown
[no] mda mda-number
[no] mda-type mda-type
[no] hi-bw-mcast-src [alarm] [group group-id]
shutdown
7750 SR OS Interface Configuration Guide