Oki c831n User Manual page 80

Changing the Equipment Settings
Admin Setup Color Setup
3
Memory Setup Receive Buffer Size
Flash Memory
Setup
SD Card Setup Initialize
System Setup Near Life Status
Buzzer Setup Invalid Operation
Power Setup
Change
Password
Settings
Item
Ink Simulation
UCR
CMY 100% Density
CMYK Conversion
Resource Save
Initialize
Resize PCL nn%
Partition
Common
mm%
PS ll%
<Apply>
Format Partition
Near Life LED
Idle Display
Panel Contrast
Volume
Error Volume
Power Save
Sleep
Auto Power Off
New Password
Verify Password
Reset Settings
Save Settings
Restore Settings
Factory Default
Off The built-in unique process simulation
engine enables the printer to simulate
the standard printing colors.
Low Selects the limit value of toner layer
thickness. When paper curl occurs in
dark color printing, selecting [Medium]
or [High] may reduce the volume of curl.
Disable Selects whether to enable 100% output
for the CMY100% tone value.
On When [OFF] is selected, the printer
simplifies the conversion process of
CMYK data in PostScript printing, which
reduces processing time.
Auto Sets the reception buffer size.
Off Sets the resource save area.
(NULL) Initializes the resident flash memory.
(NULL)
20% Sets the partition size.
50%
30%
(NULL)
PCL
Enable Sets whether to display the warning that
informs the drum, fuser, or belt is near
the end of life on the LCD display.
Enable Sets the LED lamp control of the warning
that informs the toner, drum, fuser, or
belt is near the end of life.
Toner Gauge Selects the information shown on the
display during idling.
0 Adjust the contrast of the LCD of
operation panel.
Off Sets the volume of the buzzer for the
invalid operations.
Off Sets the volume of the buzzer for errors.
Enable Sets whether to enable the power save
mode.
Enable Sets whether to enable the sleep mode.
Auto Config Sets the auto power off function.
(NULL) Sets a new password to enter the
[Admin Setup] menu and [Boot Menu].
(NULL) Enter the new password set in
[New Password] to verify.
Enter the password consisting of 6 to
12 digits with alphanumeric characters
(lower case).
(NULL) Resets EEPROM of CU to initialize the
user menu settings.
(NULL) Saves the current menu settings.
(NULL) Restores the stored menu settings.
- 80 -
Description