Home Page; Preview - Q-See QC SERIES User Manual

HOME PAGE

All of Smart PSS' functions are accessed through its main window which is referred to as the
Home Page. The functions are divided into three areas; Basic, Extension and Setting.
PICTURE 4-10
The first area, Basic, is where you'll find the live viewing, search and playback, and alarm
events functions which are the most commonly used. Extensions contains features and
operations not found on your system and Setting allows you to make changes to your DVR or
NVR as if you were at the machine. Clicking any one of the icons will open up a new window
within Smart PSS. You will be able to move between windows by clicking on its icon at the
top of the window. Hovering the mouse over the icon will reveal an X which can be clicked
upon to close that window. Only the Home Page window cannot be exited in that manner.
60

PREVIEW

Viewing live video from your connected devices takes place in the Preview window.
1
2 3
5
6 7
PICTURE 4-11
1 Icon Tab Switch between windows by clicking on icons in this area.
2 Viewing Area Shows video feed from camera
3 Active Screen Green outline indicates which channel is active for control
4 Device List/ Shows available groups and cameras
PTZ Tabs PTZ Camera Controls
5 Information Bar Appears when mouse hovers over camera view. Contains
information about bit stream, and includes shortcut controls:
Turn audio on or off
Turn microphone on or off
Begin/end local record (saves to computer's hard drive)
Take snapshot (saved to computer's hard drive)
Closes channel
6 Tasks Allows quick access to saved tasks, such as tours, channel
combinations, etc.
7 Multi-Screen Slider adjusts between single-screen view and 36-screen view with
Mode 10 configurations possible.
8 Screen Aspect Change the aspect ratio (height vs. width) of the on-screen view.
Ratio/Full Screen
Click to bring window to full screen. Pressing ESC will return to
normal window view.
9 Shortcut Menu Gives access to additional controls and functions.
4
8
9
61