Configuring Activex - Q-See QC SERIES User Manual

CONFIGURING ACTIVEX

Accessing your NVR using Internet Explorer is generally as simple as using an interactive
website. Some users may need to configure Microsoft's built-in ActiveX controls prior to
logging into their camera in order to ensure smooth operation. ActiveX is built into Internet
Explorer to enable it use multimedia content. Sometimes, this can cause conflicts with security
settings within the browser program itself.
Setting Up ActiveX Control
STEP 1. Open Internet Explorer
STEP 2. Click on Tools
STEP 3. Select Internet Options in the
pull-down menu
STEP 4. Click on the Security Tab
STEP 5. Select Trusted Sites
STEP 6. Click on the Sites button
30
PICTURE 2-38
PICTURE 2-39
STEP 7. Uncheck the "Require server
verification (https:) for all sites in
this zone" button.
STEP 8. Type the NVR's IP address
(obtained during Network Setup)
or DDNS domain name into the "Add
this website to the zone:" box.
STEP 9. Click the Add button
STEP 10. Close the window.
STEP 11. Click the Custom level...
button.
PICTURE 2-40
PICTURE 2-41
31