Editing Macros - Marantz RC9500 User Manual

DFU RC9500 Ver1_2.qxd

Editing Macros

You can edit any macro you have recorded.
1 Tap and hold the MODE
2 Tap the "MACRO" button to switch to MACRO mode.
3 Tap the "Macro to button" button if you want to edit the macro
4 Navigate to the device and the page that contains the button
5 Tap the button which holds the macro you want to edit.
6 You can Move or Delete the listed commands, or you can Add
7 You can also add delays and beeps to the macro (for example,
8 Press the "Test" button to check if edited macro performs
9 Tap "Done" to store and finish editing.
User Guide
5/28/2004 10:33 AM
more than 3 seconds. Mode Menu page appears.
The RC9500 displays first Macro mode page .
for the operation button, or "Macro to device" button for the
device to proceed to the next step.
you want to edit a macro.
The "Macro edit" page appears.
new commands.
Tap "Add"
Browse to the page, choose button
Use the arrow buttons
the right place
to insert a short pause between turning on a device and sending
commands to it, allowing the device to warm up).
The length of a delay can be adjusted:
Tap a delay.
Tap or buttons beside the list box to decrease or
increase the length of the delay.
properly.
45
Page 49
Reference
icon in the LOWER TOOL BAR
and to move the command to