Related Manuals for Bluestream HEX70ED-RX
Summary of Contents for Bluestream HEX70ED-RX
- Page 1 HEX70ED-Rx HEX70ED-Tx HEX70ED-RX/-TX User Manual HEX70ED-RX/TX User Manual...
-
Page 2: Application Diagram
Do not substitute or use any other power supply other than the enclosed unit, or a Blustream approved re- placement. Do not disassemble either the Trans- mitter or Receiver units for any reason. Doing so will void the manufacturer’s warranty. contact support@blustream.com www.bluestream.co.uk... - Page 3 • 1. Standard/Upgrade mode switch* TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission Note: The POH function is designed for powering compatible transmitter or receiver units from Blustream only. Panel Description HEX70ED-RX Receiver HEX70ED-Rx RS232 connector Standard/Upgrade mode switch...
- Page 4 NOTE: The port will only read the DIP switch settings on power-up. The device must be powered off and then back on again for it to implement any change of the DIP switch settings. contact support@blustream.com www.bluestream.co.uk...
- Page 5 HEX70ED HEX70ED User ManUal USER MANUAL CONNECTION DIAgRAM contact contact support@blustream.com support@blustream.co.uk / support@blustream.com.au...
- Page 6 • 1 x HEX70ED-Tx Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit. • 1 x HEX70ED-Rx • 2 x Mounting brackets • 1 x 12V/2A power supply • 1 x IR emitter •...
- Page 7 www.blustream.co.uk www.blustream.com.au...
Need help?
Do you have a question about the HEX70ED-RX and is the answer not in the manual?
Questions and answers