Multi Room System; Multi Room Playback Using; The Multi Room Out Terminals; The Multi Speaker Terminals - Marantz SR5500 User Manual

MULTI ROOM
SYSTEM
The Multi Room system is a function which allows
you to listen to the same or a different source in a
room other than the room in which the SR5500 is
located.
To use this function, a multi room remote unit and
remote control signal receiver available from your
Marantz dealer are necessary.
The operations possible with the multi room
function are explained briefly below.
For details, refer to the instruction manual supplied
with the multi room remote control unit and
receiver.
When the outputs of the MULTI OUT terminals are
wired and connected to amplifiers installed in
other rooms or M (MULTI) SPEAKER B terminals
are wired and connected to L&R speakers in other
room, different sources can be played in rooms
other than the main room in which this unit and the
playback devices are installed.
SR5500 has some feature to MULTI ROOM
SYSTEM as source selector, sleep timer, Multi
Room Speaker output and remote control.
32
SR5500U DFU_01_ENG 2_2
Page 32

MULTI ROOM PLAYBACK USING

THE MULTI ROOM OUT TERMINALS

The SR5500 is equipped with audio pre-out
terminals for which the volume is adjustable as the
MULTI output terminals.
A separately sold stereo power amplifier can be
connected to enjoy multi room playback.
The MULTI OUT system can not be operated with
the supplied remote controller.
1. 2. 2.
AV SURROUND RECEIVER SR5500
INPUT SELECTOR VOLUME
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 EQ DIGITAL
L C R
AAC PCM LFE
SL S SR
DOWN UP
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MULTI M. SPEAKER B MUTE 7.1CH INPUT
STANDBY ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE
AUX 1 INPUT
POWER ON / STANDBY PHONES S-VIDEO VIDEO L AUDIO R
1.
Press the MULTI button. The unit enters multi
room mode and the display indicates "SELCT
SOURCE" and flashes the "MULTI" indicator
for approx. 10 seconds.
2.
In this time, you can select the input source by
turning the input selector knob.
Then, the display indicates "MULTI VOLUME"
"MULTI VOL. xx" for approx. 5 seconds.
3.
During this time, you can set the volume level
in the multi room as desired.
This will only set the volume in the second
room.
MULTI ROOM PLAYBACK USING

THE MULTI SPEAKER TERMINALS

The SR5500 allows you to connect another set of
speakers and place them in a different room or
separated area for listening to music.
The MULTI ROOM SPEAKER system can not be
operated with the supplied remote controller.
2. 1. 2.
AV SURROUND RECEIVER SR5500
INPUT SELECTOR VOLUME
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ DIGITAL DIGITAL
L C R
AAC PCM LFE
SL S SR
DOWN UP
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MULTI M. SPEAKER B MUTE 7.1CH INPUT
STANDBY
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE
AUX 1 INPUT
S-VIDEO VIDEO L AUDIO R
POWER ON / STANDBY PHONES
1.
Press the M. SPEAKER B button. The unit
enters multi room speaker mode and the
display indicates "SELCT SOURCE" and
flashes the "MULTI" indicators for approx. 10
seconds.
2.
In this time, you can select the input source by
turning the input selector knob.
3.
Then, the display indicates "MSPKR VOLUME"
"MSPKR VOL.–18" for approx. 5 seconds.
During this time, you can set the volume level
in the multi room as desired.
This will only set the volume in the multi room.
Notes for MULTI ROOM SPEAKER
• MULTI ROOM SPEAKER On/ Off is available in
main room only.
• MULTI ROOM SPEAKER output terminals can
b e u s e d w h e n t h e S U R R O U N D B A C K
SPEAKER is set NONE in SPEAKER SETUP
menu. (See SPEAKER SETUP, page 18)
• "The Surr. Back Speakers are in use" is displayed
by pressing the MULTI SPEAKER button when
the SURROUND BACK SPEAKER is set except
NONE in SPEAKER SETUP menu. (See
SPEAKER SETUP, page 18)
• Multi room operations cannot be performed from
the remote controller.
Adobe PageMaker 6.5J/PPC
04.8.2, 4:13 PM