Yaesu FTM-400DR Instruction Manual page 11

5
Touch the connection destination you have just
selected
Connection will start and the connected destination
name will flash.
When connection is successfully established, the
menu list of the destination node will appear on the
screen.
Tip If connection cannot be established, "Not Connected" will
appear, and the node & room list will remain displayed.
● Searching by node or room name
1
Touch [▼] on the connection destination screen
The category list of your own station will appear.
2
Touch [SEARCH & DIRECT]
The character input screen will appear.
3
Touch character keys to enter the entire or part of the
node name or room name.
Characters you have just touched will appear on the
top part of the screen.
Connecting to a Faraway Station Using WIRES-X
11