Lenovo ThinkPad X1 Carbon 20BT User Manual page 99

Hide thumbs Also See for ThinkPad X1 Carbon 20BT:
Table of Contents

Advertisement

Table 4. Security menu items (continued)
Menu item
Submenu item
I/O Port Access
Ethernet LAN
Wireless LAN
Wireless WAN
Bluetooth
USB Port
Integrated Camera
Microphone
Fingerprint Reader
Internal Device
Bottom Cover
Access
Tamper Detection
Anti-Theft
Computrace Module
Activation
Secure Boot
Secure Boot
Platform Mode
Secure Boot Mode
Reset to Setup Mode
Value
Comments
• Disabled
If you select Enabled, you can use the Ethernet
LAN device.
• Enabled
• Disabled
If you select Enabled, you can use the
Wireless-LAN connection.
• Enabled
• Disabled
If you select Enabled, you can use the
wireless-WAN device.
• Enabled
• Disabled
If you select Enabled, you can use Bluetooth
devices.
• Enabled
• Disabled
If you select Enabled, you can use the USB
connectors.
• Enabled
• Disabled
If you select Enabled, you can use the integrated
camera.
• Enabled
• Disabled
If you select Enabled, you can use the
microphones (internal, external, or line-in).
• Enabled
• Disabled
If you select Enabled, you can use the
fingerprint reader.
• Enabled
• Disabled
Enable or disable the tamper detection. If
tamper is detected, Supervisor Password is
• Enabled
required to boot the system. Bottom Cover
Tamper Detection will not take effect unless
Supervisor Password is enabled.
• Disabled
Enable or disable the UEFI BIOS interface to
activate the computrace module. Computrace
• Enabled
is an optional monitoring service from Absolute
• Permanently
Software.
Disabled
Note: If you set the computrace module
activation to Permanently Disabled, you will be
unable to enable this setting again.
• Disabled
Enable or disable the UEFI Secure Boot feature.
Select Enable to prevent unauthorized operating
• Enabled
systems from running at boot time. Select
Disabled to allow any operating systems to run
at boot time.
• Setup Mode
Specify the system operating mode.
• User Mode
• Standard Mode
Specify the Secure Boot mode.
• Custom Mode
This option is used to clear the current platform
key and put the system into Setup Mode. You
can install your own platform key and customize
the Secure Boot signature databases in Setup
Mode.
Secure Boot mode will be set to Custom Mode.
.
Chapter 6
Advanced configuration
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad x1 carbon 20bs

Table of Contents