Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz SR4002/SR5002 User Manual

BASIC OPERATION
(TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country's
standard is 9 kHz step, press BAND button on the
remote controller more than 6 seconds. Scan step
will change.
Note:
Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
SLEEP
2. 1.
AUTO
1
1.
CS
4
M-CH ST
7
DOWN
REC
D PURE SIMPLE
DIRECT SETUP DISPLAY MEMORY CLEAR
M
2.
- PRESET
ENTER
HT-EQ MENU EXIT BAND T-MODE
DIGITAL
DISC+
CH-SEL
(Using the unit)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2. Press the 3 or 4 cursor buttons on the front
panel for more than 1 second to start the auto
tuning function.
3.
Automatic searching begins then stops when a
station is tuned in.
(Using the remote controller)
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2. Press the 5 or 6 for more than 1 second on
the remote controller.
3.
Automatic searching begins then stops when a
station is tuned in.
If tuning does not stop at the desired station, use to
the "Manual tuning" operation.
42
MANUAL TUNING
2. 1.
1.
DOWN
D PURE SIMPLE
DIRECT SETUP DISPLAY MEMORY CLEAR
M
ENTER
2.
HT-EQ MENU EXIT BAND T-MODE
DIGITAL
(Using the unit)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2. Press the 3 or 4 cursor buttons on the front
panel to select the desired station.
P.DIRECT SURROUND
DISPLAY
LIP SYNC/
dts INPUT
(Using the remote controller )
2 3
BAND
EX/ES VIRTUAL T.MODE
5 6
1.
To select tuner and desired band (FM or
STEREO NIGHT P.SCAN
8 9
AM), press the BAND button on the remote
controller.
T.DISP PTY F.DIRECT
2. Press the 5 or 6 on the remote controller to
+ - - TUNING TUNING + +
tune in the desired station.
ANGLE SUB TITLE AUDIO
V-OFF ATT.
DIRECT FREQUENCY CALL
SOURCE SET OFF ON
l/
SLEEP DISPLAY P.DIRECT SURROUND
1.
LIP SYNC/
AUTO dts INPUT
1 1 2 2 3 3
3. CS EX/ES VIRTUAL T.MODE
4 4 5 5 6 6
M-CH ST STEREO NIGHT P.SCAN
7 7 8 8 9 9
7.1CH IN A/D HT-EQ
0 0 +10
CL MEMO
2.
CH/ CAT VOLUME
SPKR A/B MUTE
MULTI/ CAT M-SPKR
1.
To select tuner and desired band (FM or
AM), press the BAND button on the remote
controller.
2.
Press the F.DIRECT on the remote controller,
display will show "FREQ - - - -".
3.
Input your desired station's frequency with the
numeric buttons on the remote controller.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
SLEEP DISPLAY P.DIRECT SURROUND
VOLUME
LIP SYNC/
AUTO dts INPUT
1 2 3
BAND
CS EX/ES VIRTUAL T.MODE
DOWN UP
4 5 6
M-CH ST STEREO NIGHT P.SCAN
DISPLAY MEMORY CLEAR
7 8 9
MUTE ATT
ENTER
EXIT BAND T-MODE AUX 1 INPUT
DIGITAL S-VIDEO VIDEO L AUDIO R
REC T.DISP PTY F.DIRECT
- PRESET + - - TUNING TUNING + +
When in the auto stereo mode, AUTO indicator will
DISC+ ANGLE SUB TITLE AUDIO
CH-SEL V-OFF ATT.
be illuminated on the display.
BASS TREBLE
The "ST" indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
"TUNED" and "ST" indicators are not illuminated.
If the signal is weak, it may be diffi cult to tune into
the station in stereo. In such a case, press the
T-MODE button on the front panel or remote
controller.
"AUTO" indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the "ST"
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE
button or press T-MODE button on the remote
controller again. AUTO indicator is illuminated on the
display.

PRESET MEMORY

SLEEP DISPLAY P.DIRECT SURROUND
With this unit you can preset up to 50 FM/AM stations
LIP SYNC/
AUTO dts INPUT
1 2 3
BAND
in any order.
CS EX/ES VIRTUAL T.MODE
4 5 6
For each station, you can memorize the frequency
M-CH ST STEREO NIGHT P.SCAN
7 8 9 and reception mode if desired.
7.1CH IN A/D HT-EQ
/SET UP EXIT
AUTO PRESET MEMORY
REC T.DISP PTY F.DIRECT F.DIRECT
This function automatically scans the FM and AM
- PRESET + - TUNING +
band and enters all stations with proper signal
strength into the memory.
2. 4.
AV SURROUND RECEIVER SR5002
INPUT SELECTOR
SURROUND PURE SIMPLE
MULTI MODE DIRECT SETUP
MULTI SPEAKER
STANDBY ENTER
AUTO HT-EQ MENU
POWER ON/STANDBY SETUP MIC PHONES
1.
To select FM, press the BAND button on the
front panel.
2. While pressing the MEMO button, press the 2
cursor button.
SOURCE SET OFF ON
"AUTO PRESET" will appear on the display,
l/
SLEEP DISPLAY P.DIRECT SURROUND
and scanning starts from the lowest frequency.
LIP SYNC/
AUTO dts INPUT
1 2 3
3.
Each time the tuner fi nds a station, scanning
CS EX/ES VIRTUAL T.MODE T.MODE
4 5 6
will pause and the station will be played for fi ve
M-CH ST STEREO NIGHT P.SCAN
7 8 9
seconds.
7.1CH IN A/D HT-EQ
During this time, the following operations are
0 +10
CL MEMO
CH/ CAT VOLUME
SPKR A/B MUTE possible.
The band can be changed by the BAND button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
3 cursor button during this period, this station
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are fi lled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
Note:
It is possible that existing preset memory positions
will be overwritten.
MANUAL PRESET MEMORY
3. 2. 4.
CEIVER SR5002
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY
ENTER
AUTO HT-EQ MENU
(Using the unit)
1.
Tune into the radio station you desire (Refer to
2. 5. 1. 3.
the "MANUAL TUNING" or "AUTO TUNING"
section).
VOLUME
2.
Press the MEMORY button on the front panel.
"– –" (preset number) starts blinking on the
DOWN UP
display.
DISPLAY MEMORY CLEAR
MUTE ATT
3. Select the preset number by pressing the 1
EXIT BAND T-MODE AUX 1 INPUT
DIGITAL S-VIDEO VIDEO L AUDIO R
or 2 cursor buttons, while this is still blinking
(approx. 5 seconds)
4.
Press the MEMORY button again to enter. The
display stops blinking.
The station is now stored in the specifi ed preset
memory location.
SLEEP DISPLAY P.DIRECT SURROUND
LIP SYNC/
AUTO dts INPUT
1 1 2 2 3 3
3.
CS EX/ES VIRTUAL T.MODE
4 4 5 5 6 6
M-CH ST STEREO NIGHT P.SCAN
7 7 8 8 9 9
7.1CH IN A/D HT-EQ
0 0 +10
CL MEMO MEMO
MEMORY
2.
CH/ CAT VOLUME
SPKR A/B MUTE
EXIT BAND T
MULTI/ CAT M-SPKR
INFO MENU