Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz SR4500 User Manual

BASIC OPERATION
(TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.
Default setup is 9 kHz step, if your country's
standard is 10 kHz step, Press TUNER button on
the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
TV VCR1
2. 1.
1. TUNER CD
AUX1
TV
VOL. SLEEP
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 EQ DIGITAL DIGITAL
L C R
AAC PCM LFE
SL S SR
DOWN
CLEAR MEMO
URROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MUTE
ENTER
2. BASS TREBLE
AUTO HT-EQ MENU EXIT BAND T-MODE
T-MODE
INPUT/DISC+ AUDIO
(Using the SR4500)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2.
Press the or cursor buttons on the front
panel for more than 1 second to start the auto
tuning function.
3.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press the 5 5 5 5 5 or 6 6 6 6 6 for more than 1 second on
the remote.
3.
Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use
to the "Manual tuning" operation.
30
MANUAL TUNING
2. 1.
1.
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 EQ DIGITAL DIGITAL
L C R
AAC PCM LFE
SL S SR DOWN
URROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MUTE
ENTER
2.
AUTO HT-EQ MENU EXIT BAND T-MODE
(Using the SR4500)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel
2.
Press the or cursor buttons on the front
panel to select the desired station.
(Using the remote control unit)
1.
DSS/VCR2 DVD To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
TAPE CDR/MD
seconds on the remote.
AMP
2.
Press the 5 5 5 5 5 or 6 6 6 6 6 on the remote to tune in the
MAIN
MUTE VOL.
desired station.
A/D P.SCAN/V OFF
0
CHANNEL/SKIP
DIRECT FREQUENCY CALL
TUNE/SEARCH
RDS F.DIRECT
SUB-T/ATT PTY
3.
POWER
TV VCR1 DSS/VCR2 DVD
1. TUNER CD TAPE CDR/MD
AUX1 AMP
2.
TV MAIN
VOL. SLEEP MUTE VOL.
OSD MENU
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the F.DIRECT on the remote, display will
show "FREQ - - - -".
3.
Input your desired station's frequency with the
numeric buttons on the remote.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
VOLUME
AUX1 AMP
GHT PEAK ATT ANALOG SURROUND
DIGITAL DIGITAL
EQ
L C R
AAC PCM LFE
TV MAIN SL S SR
DOWN UP
VOL. SLEEP MUTE VOL.
DISPLAY MEMORY CLEAR
MUTE ATT
CLEAR MEMO A/D P.SCAN/V OFF
0
R
EXIT BAND T-MODE
CHANNEL/SKIP
BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT
INPUT/DISC+ AUDIO SUB-T/ATT PTY
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The "ST" indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
"TUNED" and "ST" indicators are not illuminated.
If the signal is weak, it may be difficult to tune into the
station in stereo. In such a case, press the T-MODE
button on the front panel or remote.
"AUTO" indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the "ST"
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE
button or press T-MODE button on the remote again.
AUTO indicator is illuminated on the display.
PURE DIRECT AUTO DTS
1 2 3

PRESET MEMORY

NIGHT CSII EX/ES VIRTUAL
4 5 6
DISPLAY MCH-ST STEREO 7.1CH IN With this unit you can preset up to 50 FM/AM stations
7 8 9
CLEAR MEMO A/D P.SCAN/V-OFF in any order.
0
CHANNEL/SKIP For each station, you can memorize the frequency
and reception mode if desired.
BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT
AUTO PRESET MEMORY
INPUT/DISC+ AUDIO SUB-T/ATT PTY
CH.SEL LIP.SYNC
This function automatically scans the FM and AM
SYSTEM REMOTE CONTROLLER band and enters all stations with proper signal
strength into the memory.
2. 4.
AV SURROUND RECEIVER SR4500
INPUT SELECTOR
DISP MULTI AUTO TUNED ST V – OFF
SLEEP AUTO SURR DIRECT DISC 6.1
SURROUND PURE SIMPLE
MODE DIRECT SETUP
7.1CH INPUT S. SPEAKER B
STANDBY
AUTO HT-EQ MENU
POWER ON/OFF PHONES
1.
To select FM , press the BAND button on the
front panel.
2.
While pressing the MEMO button, press the
cursor button.
T-MODE RDS F.DIRECT
"AUTO PRESET" will appear on the display,
INPUT/DISC+ AUDIO SUB-T/ATT PTY
and scanning starts from the lowest frequency.
CH.SEL LIP.SYNC
3.
Each time the tuner finds a station, scanning
SYSTEM REMOTE CONTROLLER
RC5500SR
will pause and the station will be played for five
seconds.
During this time, the following operations are
possible.
The band can be changed by the BAND button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
cursor button during this period, this station
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
MANUAL PRESET MEMORY
3. 2. 4.
RECEIVER SR4500
DISP MULTI AUTO TUNED ST V – OFF
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1
SURROUND PURE SIMPLE
MODE DIRECT SETUP
R B
ENTER
AUTO HT-EQ MENU
S
(Using the SR4500)
1.
Tune into the radio station you desire (Refer to
2. 5. 1. 3.
the "MANUAL TUNING" or "AUTO TUNING"
section).
2.
VOLUME
Press the MEMO button on the front panel. "– –"
NIGHT PEAK ATT ANALOG SURROUND
DIGITAL
MTX 6.1 EQ DIGITAL
L C R (preset number) starts blinking on the display.
AAC PCM LFE
SL S SR
DOWN UP
3.
Select the preset number by pressing the
DISPLAY MEMORY CLEAR
MUTE ATT
cursor buttons, while this is still blinking
ENTER
EXIT BAND T-MODE
(approx. 5 seconds)
4.
Press the MEMO button again to enter. The
display stops blinking.
The station is now stored in the specified
preset memory location.
ENTER
SET UP/
MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1 2 3
3.
NIGHT CSII EX/ES VIRTUAL
SURROUND
NIGHT PEAK ATT ANALOG
DIGITAL
EQ DIGITAL 4 5 6
L C R
AAC PCM LFE
SL S SR
DISPLAY MCH-ST STEREO 7.1CH IN
7 8 9
2.
CLEAR MEMO A/D P.SCAN/V-OFF
DISPLAY MEMORY
0
CHANNEL/SKIP
EXIT BAND
BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT
or