Marantz SR4002/SR5002 User Manual

Marantz SR4002/SR5002 User Manual

Marantz user guide av surround receiver sr4002/sr5002
Table of Contents

Advertisement

Model SR4002/SR5002 User Guide
AV Surround Receiver

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR4002/SR5002 and is the answer not in the manual?

Questions and answers

Summary of Contents for Marantz SR4002/SR5002

  • Page 1 Model SR4002/SR5002 User Guide AV Surround Receiver...
  • Page 2: Important Safety Instructions

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 NEC - NATIONAL ELECTRICAL CODE Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. DECLARATION OF CONFORMITY U.S. Responsible Party: Marantz America, Inc. 100 Corporate Drive, Mahwah, NJ, 07430, U.S.A. TEL: 630-741-0300 Type of Product:...
  • Page 4: Table Of Contents

    INTRODUCTION Thank you for purchasing the Marantz SR4002/SR5002 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR4002/ SR5002.
  • Page 5: Features

    Logic IIx (Movie, Music and Game), Circle Surround settings just like conventional AV amplifi ers. II (Cinema and Music). In addition, Marantz has focused on the future. By • Dolby Digital EX, Dolby Digital , utilizing pre-out jacks, 7.1 direct inputs and a RS- DTS ES (Discrete 6.1, Matrix 6.1, Neo: 6)
  • Page 6 2. Full backward compatibility with all existing Dolby Pro Logic IIx is fully compatible with Dolby decoders. (Existing decoders will output a 48 kHz Surround Pro Logic technology and can optimally signal) decode the thousands of commercially available Dolby Surround encoded video cassettes and 3.
  • Page 7: Before Use

    Do not touch hot spots and that exist in your area. especially the top panel. Contact with hot areas can SR4002/SR5002 can be powered by 120V AC only. cause burns. COPYRIGHT Recording and playback of any material may OPERATION OF REMOTE CONTROLLER require consent.
  • Page 8: Names And Functions

    NAMES AND FUNCTIONS FRONT PANEL (SR4002) !0 !1 AV SURROUND RECEIVER SR4002 INPUT SELECTOR SURROUND DISP MULTI AUTO TUNED V – OFF NIGHT PEAK ANALOG DIGITAL DIGITAL SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 SPKR B SURROUND PURE SIMPLE MODE DIRECT SETUP...
  • Page 9 ATT (Attenuate) button Press this button to reduce the analog audio signal Press this button to enter the SETUP MAIN MANU. input level by about half. “ATT” indicator will be illuminated in the display. (See page 39) Press this button to turn on or off HT(Home Theater)- AUX1 INPUT jacks EQ mode.
  • Page 10: Fl Display And Indicator

    FL DISPLAY AND INDICATOR k ¡0 ¡2 ¡1 ¡3 DISP MULTI AUTO TUNED V – OFF NIGHT PEAK SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 SPKR B ™0 ¡9 DISP (Display Off) indicator V (video)-OFF mode indicator This indicator is illuminated when this unit is in the This indicator is illuminated when the Video-OFF display off mode.
  • Page 11: Rear Panel (Sr4002)

    REAR PANEL (SR4002) INPUT INPUT VIDEO VIDEO S-VIDEO S-VIDEO FM ( ( 75 75) ) ANTENNA ANTENNA INPUT INPUT VCR IN VCR IN VCR OUT VCR OUT MONITOR OUT MONITOR OUT ( ( AUX2 AUX2) ) 7.1CH INPUT 7.1CH INPUT TAPE TAPE CD/CDR...
  • Page 12 Connect a device that needs to be triggered by DC REMOTE CONT. IN/OUT terminals under certain conditions (screen, power strip, etc…) Connect to a Marantz component equipped with Use the system OSD setup menu to determine the remote control (RC-5) terminals.
  • Page 13: Remote Controller

    REMOTE CONTROLLER Indicates when the remote controller is in the LEARN The provided remote controller is a universal mode. remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote controller This button is used to enter learn mode and preset changes when one of the input selector buttons is mode.
  • Page 14 ¤0 ¤6 P.DIRECT button VOLUME +/- buttons When this button is pressed, the tone control circuit This button is used to adjust the volume for the is bypassed. amplifi er and television. Note: ¤1 BAND/LIP SYNC/INPUT button Set the AMP mode to use this button with the unit. (When TUNER mode is selected) ¤7 M-SPKR button (SR5002 only)
  • Page 15: Remote Control Operation

    To control the unit by your remote controller, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP and TUNER mode. AMP MODE SOURCE ON / OFF Turns the SR4002/SR5002 on and off LEARN SEND...
  • Page 16: Controlling Marantz Components

    Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide. • It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) SOURCE ON / OFF Turns the DVD player on and off POWER OFF...
  • Page 17 CONTROLLING A MARANTZ CD RECORDER (CDR MODE) SOURCE ON / OFF Turns the CD recorder on and off POWER OFF Turns the CD recorder off LEARN SEND POWER ON Turns the CD recorder on SOURCE SOURCE Inputs the numeric SLEEP DISPLAY P.DIRECT...
  • Page 18 CONTROLLING A MARANTZ UNIVERSAL DOCK (AUX1 MODE) SOURCE ON / OFF Turns the UNIVERSAL DOCK (Dock connector) ON and OFF POWER OFF Turns the UNIVERSAL DOCK (Dock connector) OFF LEARN SEND POWER ON Turns the UNIVERSAL DOCK (Dock connector) ON...
  • Page 19: Basic Operation

    NORMAL MODE (When operating Marantz AV equipment products) This remote controller is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifi er).
  • Page 20: Learn Mode

    Place the remote controller so that its infrared signal transmitter is facing the infrared signal Repeat steps receiver on the Marantz remote controller at a same SOURCE. distance of about 0.05 m (2 inches). Repeat steps When you have finished programming the...
  • Page 21: Connections

    Surround left and right speakers CONNECTIONS When this unit is used in surround operation, the preferred location for surround speakers is on the side walls of the room, at or slightly behind the SPEAKER PLACEMENT listening position. The center of the center speaker should face the The ideal surround speaker system for this unit is 7- center of the room.
  • Page 22: Connecting A Subwoofer

    Caution: CONNECTING AUDIO COMPONENTS • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
  • Page 23: Connecting Video Components

    CONNECTING VIDEO COMPONENTS DVD player COMPONENT DIGITAL AUDIO VIDEO S-VIDEO VIDEO OUT INPUT INPUT INPUT INPUT VIDEO VIDEO VIDEO VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO FM ( ( 75 75) ) ANTENNA ANTENNA INPUT INPUT VCR IN VCR IN VCR IN VCR IN VCR OUT VCR OUT...
  • Page 24: Connecting Hdmi Jacks And Components

    CONNECTING HDMI COMPONENTS HDMI JACK • When multiple components are connected to this unit, turn power to unused components off to This unit has 3 HDMI inputs and one HDMI output. It prevent interference between them. can send digital video and audio signals from DVDs and •...
  • Page 25: Advanced Connecting

    Therefore you need to aim the remote signal only to the unit. Also, if a Marantz power amplifi er (some models excluded) is connected to one of these terminals, the power amplifi er’s, power switch is synchronized with this unit’s power switch.
  • Page 26: Connecting The Antenna Terminals

    CONNECTING THE ANTENNA TERMINALS AM Loop FM External Antenna Antenna FM Antenna INPUT INPUT VIDEO VIDEO S-VIDEO S-VIDEO FM ( ( 75 FM ( ( 75 75) ) 75) ) ANTENNA ANTENNA ANTENNA ANTENNA INPUT INPUT VCR IN VCR IN VCR OUT VCR OUT MONITOR OUT...
  • Page 27: Xm Radio Overview (Sr5002 Only)

    XM RADIO OVERVIEW (SR5002 ONLY) SR5002 is the XM Ready ® receiver. You can receive XM Satellite Radio and Home Dock (sold separately) and subscribing the XM service. Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM. XM Satellite Radio which includes: •...
  • Page 28: Connecting For The Multi Room (Sr5002 Only)

    CONNECTING FOR THE MULTI ROOM (SR5002 only) INPUT INPUT VIDEO VIDEO S-VIDEO S-VIDEO FM ( ( 75 75) ) ANTENNA ANTENNA INPUT INPUT VCR IN VCR IN VCR OUT VCR OUT MONITOR OUT MONITOR OUT MULTI. MULTI. MULTI. MULTI. ( ( AUX2 AUX2) ) 7.1CH INPUT 7.1CH INPUT...
  • Page 29: Connecting Other Equipment

    CONNECTING OTHER EQUIPMENT INPUT INPUT VIDEO VIDEO S-VIDEO S-VIDEO FM ( ( 75 75) ) ANTENNA ANTENNA INPUT INPUT VCR IN VCR IN VCR OUT VCR OUT MONITOR OUT MONITOR OUT MULTI. MULTI. ( ( AUX2 AUX2) ) 7.1CH INPUT 7.1CH INPUT TAPE TAPE...
  • Page 30: Setup

    SETUP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM This unit incorporates an on-screen menu system, which makes various operations possible by using the cursor (3, 4, 1, 2) and ENTER buttons on the remote control or on the front panel.
  • Page 31: Input Setup

    Notes: 1 INPUT SETUP (ASSIGNABLE DIGITAL INPUT AND COMPONENT VIDEO INPUT) Use this menu to select the input jack to be assigned to the input source. Select “INPUT SETUP” in SETUP MAIN MENU with 3 or 4 cursor button, and press the ENTER button.
  • Page 32 DVD and LD’s available to guide you through proper home theater confi guration. If you are unsure, have your Marantz dealer perform the installation for you. LPF/HPF They are trained professionals familiar with even When you use a subwoofer, you can select the cutoff the most sophisticated custom installations.
  • Page 33 MRAC (Marantz Room Acoustic Calibration) Speaker settings that were diffi cult by MANUAL setup can now be made by automatically measuring speaker characteristics using the including microphone. 2-1 SPEAKER SETUP SPEAKER SETUP : AUTO SET MICROPHONE MAIN NEXT EXIT AUTO SETUP...
  • Page 34: Preference

    Notes: 3 PREFERENCE • If MRAC is started with both speaker settings A and B off, it will enter CANCEL mode without displaying an ERROR on the screen. When this happens, check the SPEAKER setting. • The measured speaker distance may differ from the actual distance from speakers.
  • Page 35: Pl Ii (Pro Logic Ii) Music Parameter

    MUSIC PARAMETER Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, SR4002/SR5002 includes three controls to fi ne-tune the soundfi eld as follows. 5 PLIIx MUSIC PARAMETER PARAMETER : DEFAULT...
  • Page 36: Simple Setup

    The relation of the speakers number and SIMPLE SETUP conectted speaker You can setup the speaker conditions quickly with CHANNEL SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. 7.1 ch These settings can be changed more detail in “2. 7.0 ch SPEAKER”...
  • Page 37: Basic Operation (Playback)

    SELECTING THE SURROUND MODE BASIC OPERATION Example: AUTO SURROUND (PLAYBACK) SELECTING AN INPUT SOURCE Before you can listen to any input media, you must fi rst select the input source on the unit. Example : DVD DISC+ ANGLE SUB TITLE AUDIO AV SURROUND RECEIVER SR5002 INPUT SELECTOR...
  • Page 38: Video Convert

    Monitor is connected with the video or component. • If, while attempting to use the video convert feature, the SR4002/SR5002 cannot synchronize with the SR4002/SR5002 display device, “NO SIGNAL” appears on the monitor, or noise is generated, this feature cannot be used.
  • Page 39: Surround Mode

    SURROUND MODE This unit is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on this unit or the remote controller.
  • Page 40: Source Direct

    AUTO EX/ES When this mode is selected, the unit determines This mode provides 6.1 channel surround for DOLBY whether the digital input signal is Dolby Digital, Dolby DIGITAL EX, DTS-ES encoded source material such Digital Surround EX, DTS, DTS-ES, DTS 96/24 or as DVD.
  • Page 41 CIRCLE SURROUND II STEREO (CSII-CINEMA, CSII-MUSIC, CSII-MONO) This mode bypasses all surround processing. Circle Surround is designed to enable multichannel In stereo program sources, the left and right channels surround sound playback of non-encoded and play normally when PCM-audio or analog stereo is multichannel encoded material.
  • Page 42: Other Function

    RECORDING AN ANALOG SOURCE OTHER FUNCTION In normal operation, the audio or video source selected for listening through this unit is sent to the DISPLAY MODE record outputs. This means that any program you are watching or listening to may be recorded simply by placing ER SR5002 LEARN SEND...
  • Page 43: Listening Through Headphones

    LISTENING THROUGH HEADPHONES DOLBY HEADPHONE MODE This jack may be used to listen to the unit’s output This feature simulates the waveforms of the actual through a pair of headphones. Be certain that the sounds heard from the speakers. headphones have a standard 1/4” stereo phono When headphones are used, the MENU button plug.
  • Page 44: Aux2 Input

    AUX2 INPUT If you don’t need to connect 7.1 Ch. input terminals M-CH ST STEREO NIGHT P.SCAN AV SURROUND RECEIVER SR5002 INPUT SELECTOR with multi channel decoder, 7.1CH IN 7.1CH IN HT-EQ L(front left) and R (front right) inputs terminals are MEMO VOLUME VOLUME...
  • Page 45: Basic Operation (Tuner)

    MANUAL TUNING BASIC OPERATION (TUNER) LISTENING TO THE TUNER Frequency scan step for AM is selectable. PURE DIRECT Default setup is 10 kHz step, if your country’s standard is 9 kHz step, press BAND button on the HT-EQ remote controller more than 6 seconds. Scan step will change.
  • Page 46 (Using the remote controller) (Using the remote controller) Tune into the radio station you desire (Refer to Press the P.SCAN on the remote controller. the “MANUAL TUNING” or “AUTO TUNING” “PRESET SCAN” appears on the display and section). then the preset station with the lowest preset Press the MEMO button on the remote number is recalled fi...
  • Page 47: Listening To Xm Satellite Radio (Sr5002 Only)

    CHECKING THE XM SIGNAL STRENGTH LISTENING TO XM SATELLITE RADIO AND RADIO ID (SR5002 ONLY) SELECTING AN INPUT SOURCE Before you can listen to XM Satellite Radio, you must fi rst select the input source on the SR5002. SOURCE SLEEP DISPLAY P.DIRECT SURROUND...
  • Page 48: Preset Search Mode

    When the channel Ar tist name/Song title is When you press the INFO button, the following displayed: information will be displayed. N A M E / T I T L E P i n k F l o i d F l o i d M o n e y The “NAME/TITLE”...
  • Page 49: Category Search Mode

    CATEGORY SEARCH MODE (Using the SR5002) You can select the desired channel from the category allocated to each channel. Category being aired can be only selected. 5. 3. 6. AV SURROUND RECEIVER SR5002 INPUT SELECTOR VOLUME DOWN SURROUND PURE SIMPLE MULTI MODE DIRECT...
  • Page 50: Preset Memory

    CHECKING THE XM PRESET CHANNEL PRESET MEMORY The preset channel can be checked on the on screen You can store the desired channel in the Preset display. Memory. In addition to AM and FM, it is possible to preset 50 XM channels.
  • Page 51: Multi Room System (Sr5002 Only)

    MULTI ROOM PLAYBACK USING THE MULTI MULTI ROOM ROOM OUT TERMINALS SYSTEM (SR5002 only) The SR5002 is equipped with audio pre-out terminals for which the volume is adjustable as the MULTI The Multi Room system is a function which allows output terminals.
  • Page 52: Surround Speaker B System (Sr4002 Only)

    ANOTHER ROOM PLAYBACK USING THE SURROUND S (SURROUND) SPEAKER B TERMINALS SPEAKER B SYSTEM The SR4002 allows you to connect another set of speakers and place them in a another room or (SR4002 only) separated area for listening to music. The SURROUND SPEAKER B system can not be The Surround Speaker B system is a function which operated with the supplied remote controller.
  • Page 53: Troubleshooting

    If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz authorized dealer or the Marantz Service Center in your country.
  • Page 54: Hdmi

    HDMI SYMPTOM CAUSE The display does not appear The connected monitor or projector does not support HDCP. over an HDMI connection. The HDMI input of on the TV is not on. The HDMI output on the source component (DVD, Set Top Box, etc.) is not on.
  • Page 55: Xm Satellite Radio

    XM SATELLITE RADIO If a problem should arise, fi rst check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers and other components operating properIy? If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
  • Page 56: Technical Specifications

    TECHNICAL SPECIFICATIONS FM TUNER SECTION VIDEO Frequency Range ...87.5 – 108.0 MHz Television Format ...NTSC Usable Sensitivity ...IHF 1.8 µV/16.4 dBf Input Level/Impedance ...1 Vp-p/75 ohms Signal to Noise Ratio ... Mono/Stereo 75/70 dB Output Level/Impedance ...1 Vp-p/75 ohms Distortion ... Mono/Stereo 0.2/0.3 % Video Frequency Response ...5 Hz to 8 MHz (–...
  • Page 57: Setup Codes

    1026, 1062, 1103, 1110 Magnavox ...1003, 1052, 1053 Daewoo ... 1003, 1013, 1024, 1035 1036, 1059, 1084, 1101 Daytron ...1003, 1013, 1016 Marantz ... 1003, 1031, 1067, 1122 Dimensia ...1103, 1110 Mitsubishi ...1003, 1024, 1051 Dumont ...1003, 1010, 1153 Electroband ... 1001 Motorola ...1014, 1069...
  • Page 58 Magnasonic ...3038, 3052, 3067 Magnavox ...3008, 3009, 3010 3045, 3067, 3071 Realistic ... 3008, 3009, 3012, 3021 Magnin ...3021, 3052 Marantz ...3009, 3029, 3034 3040, 3045, 3062, 3083 Ricoh ...3002, 3059 Marta ... 3052 Runco ... 3071 Samsung ...3013, 3020, 3021...
  • Page 59 Hughes ...4001, 4016 Janeil ... 4025 JVC ... 4017 Mitsubishi ... 4001 Panasonic ...4004, 4010 Philips ...4031, 4035 Proscan ... 4002, 4008, 4009, 4011 Radio Shack ...4036, 4037 RCA ... 4002, 4008, 4009, 4029 Realistic ... 4040 Rural Cable ... 4036 Samsung ...4022, 4027 Sony ...4003, 4012, 4014 Star Choice ...
  • Page 60 You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China 07/2007 00M32CW851250 mzh-d...

This manual is also suitable for:

Sr5002Sr4002

Table of Contents

Save PDF