Recording An Analog Source; Ht-Eq; 7.1 Ch Input - Marantz SR3001 User Manual

RECORDING AN ANALOG SOURCE

In normal operation, the audio or video source
selected for listening through the SR3001 is sent to
the record outputs.
This means that any program you are watching
or listening to may be recorded simply by placing
machines connected to the outputs for TAPE OUT,
CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in
the record mode.
To record the input source signal you are currently
watching or listening to
1.
POWER
AV SURROUND RECEIVER SR3001
INPUT SELECTOR
TV VCR1
DISP MULTI AUTO TUNED ST V – OFF NIG
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1
1.
TUNER CD
SURROUND PURE SIMPLE
MODE DIRECT SETUP
7.1CH INPUT S. SPEAKER B
AUX1
STANDBY
ENTER
AUTO

HT-EQ

MENU TV
POWER ON/OFF PHONES
VOL. SLEEP
OSD
1.
Select the input source to record by turning the
INPUT FUNCTION SELECTOR knob on the
front panel or simply press the input selector
buttons on the remote.
The input source is now selected and you may
watch or listen to it as desired.
2.
The currently selected input source signal
is output to the TAPE OUT, CD-R/MD OUT,
VCR1 OUT, and DSS/VCR2 OUT outputs for
recording.
3.
Start recording to the recording component as
desired.
28
Recording the video from one source and the
audio from another
You can add the sound from one source to the
video of another source to make your own video
recordings.
Below is an example of recording the sound from
a compact disc player connected to CD IN and the
video from a video camera connected to VCR1 to
video cassette recorder connected to the DSS/VCR2
OUT jack.
1.
TV VCR1 DSS/VCR2
2. TUNER CD TAPE
AUX1 AMP
TV
VOL.
SLEEP MUTE
DSS/VCR2 DVD
OSD MENU
TAPE CDR/MD
AMP 1.
Switch the video output source to VCR1 by
MAIN MAIN
MUTE VOL.
simply pressing the input selector buttons on
the remote.
MENU
2.
Switch the audio input source to CD by simply
pressing the input selector buttons on the
remote.
3.
Now "CD" has been selected as the audio input
source and "VCR1" as the video input source.
Notes:
• If you change the input source during recording, you
will record the signals from the newly selected input
source.
• You cannot record the surround effects.
• There is no conversion from digital to analog .
When connecting CD players and other digital
components, do not connect only the digital
terminals, but the analog ones as well.
HT-EQ
AV SURROUND RECEIVER SR3001
INPUT SELECTOR
SURROUND
MODE
7.1CH INPUT S. SPEAKER B
STANDBY
AUTO
POWER ON/OFF PHONES
Press the HT-EQ button on the front panel to turn on
DVD
the HT-EQ mode.
CDR/MD
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back over
MAIN
VOL.
audio equipment in the home. This is because fi lm
soundtracks were designed to be played back in large
movie theater environments.
Activating the HT-EQ feature when watching a fi lm
made for movie theaters corrects this and restores
the correct tonal balance.
The HT-EQ feature can be activated only while in
Dolby Pro Logic Mode, or while decoding Dolby
Digital or DTS encoded material.

7.1 CH INPUT

The SR3001 is equipped for future expansion through
the use of Multi channel SACD multichannel player or
DVD-Audio player.
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ DIGITAL DIGITAL
L C R
LFE
AAC PCM When this is selected, the input signals connected to
SL S SR
DOWN
the L(front left), R (front right), CENTER, SL (surround
PURE SIMPLE
DIRECT SETUP DISPLAY MEMORY CLEAR
MUTE
left), SR (surround right) and SBL (surround back left)
ENTER
HT-EQ MENU EXIT BAND T-MODE
and SBR (surround back right) channels of the 7.1
CH. In jacks are output directly to the front (left and
right), center, surround (left and right) and surround
back speaker systems as well as the pre-out jacks
without passing through the surround circuitry.
In addition, the signal input to the SW (subwoofer)
jack is output to the PRE OUT SW (subwoofer) jack.
When 7.1 CH. INPUT is selected, the last video input
used remains routed to the Monitor Outputs.
This permits simultaneous viewing with video
sources
2. 1.
AV SURROUND RECEIVER SR3001
INPUT SELECTOR
7.1CH INPUT S. SPEAKER B
STANDBY
POWER ON/OFF PHONES
4.
SURROUND
DIGITAL
L C R
LFE
SL S SR
DOWN
MEMORY CLEAR
MUTE
BAND T-MODE
1.
Select a desired Video source to decide the
routed video signal to the Monitor Outputs .
2.
Press the 7.1 CH INPUT button on the front
panel or press 7.1 CH IN on the remote to
switch the 7.1 channel input.
POWER
DISP MULTI
SLEEP AUTO
1.
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
SURROUND PURE
MODE DIRECT
AUTO HT-EQ AUX1 AMP
4.
TV MAIN
VOL. SLEEP MUTE VOL.
OSD MENU
ENTER
VOLUME SET UP/
MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES VIRTUAL
UP
4 5 6
2.
DISPLAY MCH-ST STEREO 7.1CH IN
7 8 9
ATT
CLEAR MEMO A/D P.SCAN/V-OFF
0
CHANNEL/SKIP