7.1 Ch Input Level - Marantz SR3001 User Manual

3.
If it is necessary to adjust the output level of
each channel, press the CH.SEL button on the
remote.
Adjust the speaker output levels so that you can
hear the same sound level from each speaker
at the listening position. For the front left, front
right, center, surround left, surround right and
surround back speakers, the output levels can
be adjusted between –10 to +10 dB.
The subwoofer can be adjusted between –15
and +10 dB.
These adjustments result will be stored to 7.1
CH. INPUT memory.
4.
Adjust the main volume with the MAIN VOLUME
knob or the VOL buttons on the remote.
To cancel the 7.1 CH. INPUT setting, press the 7.1
CH INPUT button on the front panel or press 7.1 CH
IN on the remote.
Notes:
• When the 7.1 CH. Input is in use, you may not select
a surround mode, as the external decoder determines
processing.
• In addition, there is no signal at the record outputs
when the 7.1 CH. Input is in use.

7.1 CH INPUT LEVEL

This menu is to adjust the speaker levels for 7.1-
channel input sources.
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.
1. 3. 5. 4. 5. 2. 5.
D RECEIVER SR3001
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ
L R
C
LFE
AAC PCM
SL S SR
DO
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
EAKER
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE
ES
TV MAIN
4. 5.
VOL. VOL.
SLEEP MUTE
OSD MENU
1. 3. 5.
ENTER
2. 5.
SET UP/
MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1.
Press the CH.SEL button on the remote to
enter this menu.
2. Press 3 or 4 cursor button to select desired
channel.
3. Using the 1 or 2 cursor button, adjust the
volume level of each channel.
Maximum +10dB
+9dB
button
1 dB interval
Reference
0dB
1 dB interval
button
-9dB
Minimum -10dB
Notes:
• When no operation is taken for 5 seconds, the level
setup mode will be cancelled.
• The condition of these setup will be memorized to
7.1CH INPUT source.
MENU STRUCTURE of 7.1CH INPUT LEVEL setup
7.1-L >-10>...>0>...>+10dB
7.1-C >-10>...>0>...>+10dB
7.1-R >-10>...>0>...>+10dB
7.1-SR >-10>...>0>...>+10dB
7.1-SBR >-10>...>0>...>+10dB
7.1-SBL >-10>...>0>...>+10dB
7.1-SL >-10>...>0>...>+10dB
7.1-SW >-15>...>0>...>+10dB
29