Basic Operation (Play Back); Selecting An Input Source; Selecting The Surround Mode; Adjusting The Main Volume - Marantz SR3001 User Manual

BASIC OPERATION
(PLAY BACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must
fi rst select the input source on the SR3001.
Example : DVD
AV SURROUND RECEIVER SR3001
POWER
INPUT SELECTOR
DISP MULTI AUTO TUNED ST V –
SLEEP AUTO SURR DIRECT DISC 6.1
TV VCR1 DSS/VCR2
TUNER CD TAPE
SURROUND PURE SIMPLE
MODE DIRECT SETUP
7.1CH INPUT S. SPEAKER B
STANDBY
AUTO HT-EQ MENU
POWER ON/OFF PHONES AUX1 AMP
TV
VOL. SLEEP MUTE
OSD MENU
To select DVD, turn the INPUT FUNCTION
SELECTOR knob on the front panel or simply press
the DVD button on the remote.
After you have selected DVD, simply turn on the DVD
player and play the DVD.
• The input name will appear in the display on the front
panel.
• As the input is changed, the SR3001 will
automatically switch to the digital input, surround
mode, attenuation, and night mode status which
were entered during the confi guration process for
that source.
• When an audio source is selected, the last video
input used remains routed to the VCR1 & DSS/
VCR2 Outputs and Monitor Outputs. This permits
simultaneous viewing and listening to different
sources.
• When a Video source is selected, the video signal
for that input will be routed to the Monitor Outputs
jacks and will be viewable on a TV monitor
connected to the SR3001.
If a component video input is connected to the
DVD or DSS component inputs, it will be routed
to the Component Video Output. Make certain
that your TV is set to the proper input to view the
signal.

SELECTING THE SURROUND MODE

Example : AUTO SURROUND
AV SURROUND RECEIVER SR3001
INPUT SELECTOR
DISP MULTI AUTO TUNED
SLEEP AUTO SURR DIRECT
PURE DIRECT
SURROUND PURE SIMPLE
MODE DIRECT SETUP
7.1CH INPUT S. SPEAKER B
DISPLAY
STANDBY
AUTO HT-EQ MENU
POWER ON/OFF PHONES
To select the surround mode during playback, press
DVD the SURROUND MODE button on the front panel or
the Surround mode buttons on the remote.
CDR/MD
MAIN
VOL.

ADJUSTING THE MAIN VOLUME

VOLUME
AK ATT ANALOG SURROUND
DIGITAL
EQ DIGITAL
L C R
AAC LFE
PCM
SL S SR
DOWN UP
DISPLAY MEMORY CLEAR
MUTE ATT
EXIT BAND T-MODE
Adjust the volume to a comfortable level using the
VOLUME control knob on the front panel or VOL 3 /
4 buttons on the remote.
To increase the volume, turn the VOLUME knob
clockwise or press VOL 3 button on the remote, to
decrease the volume, turn counterclockwise or press
VOL 4 button on the remote.
Notes:
• The volume can be adjusted within the range of – ∞ to
18 dB, in steps of 1 dB.
• However, when the channel level is set as described
on page 20, if the volume for any channel is set at +1
dB or greater, the volume cannot be adjusted up to 18
dB.
(In this case the maximum volume adjustment range
is "18 dB - Maximum value of channel level)
ADJUSTING THE TONE (BASS & TREBLE)
CONTROL
PURE DIRECT AUTO
1
NIGHT CSII
ENTER
4
DISPLAY MCH-ST
7
SET UP/ MENU OFF
T.TONE
CLEAR MEMO
AUTO DTS
1 2 3
NIGHT CSII EX/ES VIRTUAL
4 5 6
MCH-ST STEREO 7.1CH IN BASS TREBLE
7 8 9
CLEAR MEMO A/D P.SCAN/V-OFF
T-MODE
0
CHANNEL/SKIP
INPUT/DISC+ AUDIO
BASS TREBLE TUNE/SEARCH
CH.SEL
During a listening session you may wish to adjust the
Bass and Treble Control to suit your listening tastes
or room acoustics.
(Using the remote control unit)
To adjust the bass effect, press BASS3 or BASS4
on the remote.
To adjust the treble effect, press TREBLE3 or
TREBLE4 on the remote.
Note:
TV VCR1 DSS/VCR2 DVD
The tone control function can work in the AUTO
TUNER CD TAPE CDR/MD
Surround, Stereo, Dolby PLIIx, DTS, DTS-ES, and
AUX1 AMP
Multi Ch. Stereo mode.
TV MAIN
VOL. SLEEP MUTE VOL.

TEMPORARILY TURNING OFF THE SOUND

OSD MENU
ENTER
VOLUME
ANALOG SURROUND
DIGITAL DIGITAL
L C R
AAC PCM LFE
SL S SR
DOWN UP
DISPLAY MEMORY CLEAR
MUTE ATT
EXIT BAND T-MODE
To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the front panel or MUTE button on the
remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording
or dubbing that may be in progress.
When the system is muted, the display will show
"MUTE" .
Press the MUTE button again to return to normal
operation.

USING THE SLEEP TIMER

DTS
2 3
EX/ES VIRTUAL
5 6
STEREO 7.1CH IN
8 9
A/D P.SCAN/V-OFF
0
CHANNEL/SKIP
TUNE/SEARCH
RDS F.DIRECT
To program the SR3001 for automatic standby, press
SUB-T/ATT PTY
the SLEEP button on the remote.
LIP.SYNC
Each press of the button will increase the time before
shut down in the following sequence.
OFF 10
90 80
The sleep time will be shown for a few seconds in the
display on the front panel, and it will count down until
the time has elapsed.
When the programmed sleep time has elapsed, the
unit will automatically turn off.
Note that the SLEEP indicator on the display will
illuminate when the Sleep function is programmed.
To cancel the Sleep function, press the SLEEP button
until the display shows "SLEEP OFF" and the SLEEP
indicator will disappear.
TV VCR1 DSS/VCR2 DVD

NIGHT MODE

TUNER CD TAPE CDR/MD
AUX1 AMP
TV MAIN
VOL. SLEEP MUTE VOL.
OSD MENU
ENTER
Press the NIGHT button on the remote to turn on the
NIGHT mode.
Selecting the Night Mode ON is effective in Dolby
Digital only, and it compresses the dynamic range.
This softens loud passages such as sudden
explosions, to help prevent disturbing others late
at night.
To turn off the Night mode, press the NIGHT button
again.
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
AUX1 AMP
TV MAIN
VOL. SLEEP MUTE VOL.
OSD MENU
ENTER
20 30 40
70 60 50
OSD MENU
ENTER
SET UP/
MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES VIRTUAL
4 5 6
DISPLAY MCH-ST STEREO 7.1CH IN
7 8 9
CLEAR MEMO A/D P.SCAN/V-OFF
0
CHANNEL/SKIP
BASS TREBLE TUNE/SEARCH
23