Fl Display - Marantz SR3001 User Manual

@2
HEADPHONE jack for stereo
headphones
This jack may be used to listen to the SR3001's
output through a pair of headphones. Be certain
that the headphones have a standard 1 / 4" stereo
phono plug. Note that the main room speakers will
automatically be turned off when the headphone
jack is in use.
Notes:
• When using headphones, the surround mode
will change to STEREO and TruSurround (TS)
headphones by SURROUND MODE button.
• The surround mode returns to the previous setting
as soon as the headphone plug is removed from the
jack.

FL DISPLAY

s d
a f
DISP AUTO TUNED ST
SLEEP AUTO SURR DIRECT DISC 6.1
¡7
a
DISP (Display Off) indicator
This indicator is illuminated when the SR3001 is in
the display off condition.
s
SLEEP timer indicator
This indicator is illuminated when the sleep timer
function is active.
d
AUTO SURR (Auto Surround
mode) indicator
This indicator is illuminated to show that the AUTO
SURROUND mode is in use.
f
TUNER's indicators
AUTO : This indicator illuminates when the
tuner's Auto mode is in use.
TUNED : This indicator illuminates when
a station is being received with
suffi cient signal strength to provide
acceptable listening quality.
ST(Stereo) : This indicator illuminates when an
FM station is being tuned into stereo
condition.
g
DTS-ES mode indicators
(DISC6.1, MTX6.1)
These indicators will illuminate to show the DTS-ES
decoding mode (Discrete 6.1 or Matrix 6.1).
h
V (video)-OFF mode indicator
This indicator is illuminated when the Video-OFF
function is active.
g j l ¡1 ¡3
¡0 ¡2
h k
V – OFF NIGHT PEAK ATT ANALOG
DIGITAL
MT X 6.1 SPKR B EQ
PCM
¡6 ¡8
j
NIGHT mode indicator
This indicator is illuminated when the SR3001 is in
the Night mode, which reduces the dynamic range of
digital program material at low volume levels.
k
SPKR (Speaker) B indicator
This indicator is illuminated when the S(Surround)
speaker B system is active.
l
PEAK indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than the capable level of internal processing,
this will illuminate. If this happens, you should press the
ATT button on the front panel or the remote.
¡0
EQ mode indicator
This indicator is illuminated when the HT-EQ function
is active.
¡1
ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
¡2
DIGITAL Input Indicator
This indicator lights when a digital input has been
selected.
¡3
ANALOG input indicator
This indicator is illuminated when an analog input
source has been selected.
¡4
SIGNAL FORMAT indicators
2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some
¡4
of these indicators will be illuminated to display the
specifi c type of signal in use.
SURROUND
¡5
ENCODED CHANNEL STATUS
DIGITAL
indicators
L C R
LFE These indicators display the channels that are
SL S SR encoded with a digital
input signal. If the selected digital input signal is
Dolby Digital 5.1ch or DTS 5.1ch, "L", "C", "R", "SL",
"SR" and "LFE" will be illuminated. If the digital input
¡5
signal is 2 channel PCM-audio, "L" and "R" will be
displayed.
If Dolby Digital 5.1ch signal with Surround EX fl ag or
DTS-ES signal comes in, "L", "C", "R", "SL", "S" , "SR"
and "LFE" will be illuminated.
¡6
Main Information Display
This display shows messages relating to the status,
input source, surround mode, tuner, volume level or
other aspects of unit's operation.
¡7
DIRECT (Pure direct) indicator
This indicator is illuminated when the SR3001 is in
the PURE DIRECT mode.
¡8
HDCD indicator
When HDCD signal is decoded from digital input, this
indicator will light up.
5