Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz R3001 User Manual

BASIC OPERATION
(TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.
Default setup is 9 kHz step, if your country's standard
is 10 kHz step, Press TUNER button on the remote
more than 6 seconds. Scan step will change.
Note:
Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
TV VCR1
2. 1.
1. TUNER
AUX1
TV
VOL. SLEEP
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG SURROUND
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ DIGITAL
L C R
AAC PCM LFE
SL S SR
DOWN
RROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MUTE
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE 2. BASS TREBLE
T-MODE
INPUT/DISC+ AUDIO
(Using the SR3001)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel.
2. Press the 3 or 4 cursor buttons on the front
panel for more than 1 second to start the auto
tuning function.
3.
Automatic searching begins then stops when a
station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2. Press the 5 or 6 for more than 1 second on
the remote.
3.
Automatic searching begins then stops when a
station is tuned in.
If tuning does not stop at the desired station, use to
the "Manual tuning" operation.
30
MANUAL TUNING
2. 1.
1.
SURROUND
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG
DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ DIGITAL
L C R
AAC PCM LFE
SL S SR
DOWN
RROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
MUTE
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE
2.
(Using the SR3001)
1.
To select tuner and desired band (FM or AM),
press the BAND button on the front panel
2.
Press the 3 or 4 cursor buttons on the front
panel to select the desired station.
DSS/VCR2 DVD
(Using the remote control unit)
CD TAPE CDR/MD
1.
To select tuner and desired band (FM or AM),
AMP
press the TUNER button twice within in two
MAIN
MUTE VOL.
seconds on the remote.
0
2. Press the 5 or 6 on the remote to tune in the
CHANNEL/SKIP
desired station.
TUNE/SEARCH
RDS F.DIRECT
DIRECT FREQUENCY CALL
SUB-T/ATT PTY
3.
POWER
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
1.
AUX1 AMP
2.
TV MAIN
VOL. SLEEP MUTE VOL.
OSD MENU
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the F.DIRECT on the remote, display will
show "FREQ - - - -".
3.
Input your desired station's frequency with the
numeric buttons on the remote.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
TV VCR1 DSS/VCR2 DVD
VOLUME
TUNER CD TAPE CDR/MD
SURROUND
HT PEAK ATT ANALOG
DIGITAL DIGITAL
EQ
L C R
AAC PCM LFE
SL S SR
DOWN UP
AUX1 AMP
TV MAIN DISPLAY MEMORY CLEAR
MUTE ATT
VOL. SLEEP MUTE VOL.
EXIT BAND T-MODE
0
CHANNEL/SKIP
BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
INPUT/DISC+ AUDIO SUB-T/ATT PTY
The "ST" indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
"TUNED" and "ST" indicators are not illuminated.
If the signal is weak, it may be diffi cult to tune into the
station in stereo. In such a case, press the T-MODE
button on the front panel or remote.
"AUTO" indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the "ST"
indicator is not illuminated.
To return to auto stereo mode, press the T-MODE
button or press T-MODE button on the remote again.
AUTO indicator is illuminated on the display.

PRESET MEMORY

With this unit you can preset up to 50 FM/AM stations
PURE DIRECT AUTO DTS
in any order.
1 2 3
NIGHT CSII EX/ES VIRTUAL For each station, you can memorize the frequency
4 5 6
DISPLAY MCH-ST STEREO 7.1CH IN
and reception mode if desired.
7 8 9
CLEAR MEMO A/D P.SCAN/V-OFF
0
CHANNEL/SKIP
AUTO PRESET MEMORY
BASS TREBLE TUNE/SEARCH
This function automatically scans the FM and AM
T-MODE RDS F.DIRECT
band and enters all stations with proper signal
INPUT/DISC+ AUDIO SUB-T/ATT PTY
strength into the memory.
CH.SEL LIP.SYNC
SYSTEM REMOTE CONTROLLER
2. 4.
RC 00SR
AV SURROUND RECEIVER SR3001
INPUT SELECTOR
DISP MULTI AUTO TUNED ST V – OFF
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1
SURROUND PURE SIMPLE
MODE DIRECT SETUP
7.1CH INPUT S. SPEAKER B
STANDBY ENTER
AUTO HT-EQ MENU
POWER ON/OFF PHONES
1.
To select FM , press the BAND button on the
front panel.
2. While pressing the MEMO button, press the 2
T-MODE RDS F.DIRECT
cursor button.
INPUT/DISC+ AUDIO SUB-T/ATT PTY
CH.SEL LIP.SYNC
"AUTO PRESET" will appear on the display,
SYSTEM REMOTE CONTROLLER
and scanning starts from the lowest frequency.
RC5500SR
3.
Each time the tuner fi nds a station, scanning
will pause and the station will be played for fi ve
seconds.
During this time, the following operations are
possible.
The band can be changed by the BAND button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
3 cursor button during this period, this station is
skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are fi lled or when auto
scanning attains the highest end of all bands.
If you desire to stop the auto preset memory at
anytime, press the CLEAR button.
MANUAL PRESET MEMORY
3. 2. 4.
RECEIVER SR3001
DISP MULTI AUTO TUNED ST V – OFF NIGHT
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1
SURROUND PURE SIMPLE
MODE DIRECT SETUP
R B
ENTER
AUTO HT-EQ MENU
2. 5. 1. 3.
(Using the SR3001)
1.
Tune into the radio station you desire (Refer to
VOLUME
SURROUND the "MANUAL TUNING" or "AUTO TUNING"
NIGHT PEAK ATT ANALOG
DIGITAL DIGITAL
EQ
L C R
LFE
AAC PCM
SL S SR DOWN UP
section).
DISPLAY MEMORY CLEAR
MUTE ATT
2.
Press the MEMO button on the front panel. "– –"
EXIT BAND T-MODE
(preset number) starts blinking on the display.
3. Select the preset number by pressing the 3
or 4 cursor buttons, while this is still blinking
(approx. 5 seconds)
4.
Press the MEMO button again to enter. The
display stops blinking.
The station is now stored in the specifi ed preset
memory location.
ENTER
SET UP/
MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1 2 3
3.
SURROUND NIGHT CSII EX/ES VIRTUAL
PEAK ATT ANALOG
DIGITAL DIGITAL
EQ
L C R 4 5 6
AAC PCM LFE
SL S SR
DISPLAY MCH-ST STEREO 7.1CH IN
7 8 9
2.
CLEAR MEMO A/D P.SCAN/V-OFF
DISPLAY MEMORY
0
CHANNEL/SKIP
EXIT BAND
BASS TREBLE TUNE/SEARCH
T-MODE RDS F.DIRECT