Advertisement
Installation
This modern, functional and practical cooker, that
was manufactured with parts and materials of the
highest quality and will meet your cooking needs in
every aspect. You should read this manual in order
to avoid encountering any problems with your
cooker and in order to achieve the best possible
cooking results. The following are the instructions
for correct installation and service processes. It
must be read by the technician who will install the
appliance.
!
Important: This appliance must be installed by
qualified people according to the manufacturers
installation instructions, local building regulations,
gas authority codes and electrical wiring
instructions.
Environment where your appliance will be installed
•
Your product must be set up and used in a
place where it will always have ventilation
•
While operating, this appliance needs
per kw input.
•
There must be a natural ventilation enough to
provide the gas to be used in the environment.
The average air flow must directly come in
through the air holes that will be opened on the
walls that are opened towards outside.
Air inlet section
2
min. 100cm
Figure 1
•
These air holes must have at least the effective
cross section of 100cm
(One or more air holes can be opened.). This hole
(or holes) must be opened so that they should not
be blocked. Preferably they must be placed close
to the bottom and at opposite side of the smokes
of the burned gases that were emptied. If it seems
not possible to open these ventilations in the place
where the appliance is set up, the needed air can
also be obtained through the next room, provided
that this place is not a bedroom or a dangerous
place. In this case this "next room" must also be
ventilated as required.
Emptying of the Burned Gases from Environment
6
.
3
2m /h air
Air inlet section
2
min. 100cm
Figure 2
for fresh air circulation
2
Customer Helpline 0345 257 7271
Cooker hood
flue
Air inlet section
2
min. 100cm
Figure 3
COOKER HOOD
The cooking appliances that operate with gas,
throw the burned gas wastes out directly to the
outside or through the cooker hoods that are
connected to a chimney that opens directly to the
outside. If it seems not possible to install a cooker
hood, it is required to set an electric fan on the
window or wall that has access to fresh air. This
electric fan must have the capacity to change the
air of the kitchen environment 4-5 times of its own
volume of air per hour
.
Installation of product
There are some factors that must be paid attention
to while installing your product. You must be very
careful while installing your product. Pay attention
to our below instructions in order to be able to
prevent any problems and/or dangerous situations
that may occur later
.
•
The appliance can be placed close to other
furniture on condition that in the area where the
oven is set up, the furniture's height does not
exceed the height of the cooker panel
•
Pay attention not to place it near the
refrigerator, there must be no flammable or
inflammable materials such as curtain,
waterproof cloth, etc. that will begin to burn
quickly
.
•
The furniture close to product must be
manufactured resistant to temperatures up to
100°C.
Electrical ventilator
Air inlet section
min. 100cm
Figure 4
90cm
Figure 5
.
2
Hide quick links:
Advertisement
