Configuring The Temperature Control Parameters And Using The Device; Configuring The Wifi Network And Cloud Services - Vimar 02911 Installer Manual

CAUTION: At the end of the first configuration procedure, the timer-thermostat and the mobile
device with which you performed the procedure will be paired. The timer-thermostat 02911 can
then be controlled (via WiFi) only by the mobile device with which it was configured. If you wish
to control the 02911 also with other devices then you need to carry out the pairing procedure for
additional devices described in paragraph 6.4.

6.2 Configuring the temperature control parameters and using the device

If your mobile device has been properly paired with the timer-thermostat, you can set the temperature control
parameters (temperature profiles, setpoint, etc.); the By-clima App clearly displays all the instructions in a
user-friendly manner for making the desired settings.
After these settings, send the configuration to the timer-thermostat or proceed to configure the network
parameters as shown in the next paragraph (6.3).

6.3 Configuring the WiFi network and cloud services

The network parameters should be configured during initial installation and/or if you change the network cre-
dentials with which the timer-thermostat connects to your home WiFi.
Using the By-clima App, you enter the section shown in the figure on the next page and proceed by entering
the parameters with which the timer-thermostat will connect to your home WiFi network (network name, pass-
word, address assignment method, etc.).
Collegati al CronoTermostato
Inserisci ora il PIN di accesso di rete
per proseguire con la configurazione.
Il valore di default del PIN è 1234.
0000
Ti consigliamo inoltre di modificare il
PIN di rete per limitare l'accesso al
tuo Cronotermostato.
0000
To enter the parameters follow the guided procedure displayed by the By-clima app.
After making the settings, the timer-thermostat will automatically reboot the network interface and, with a
specific icon as shown below, it will show the state of its connection to the WiFi network:
Come vuoi procedere?
Configurare i parametri
di accesso alla rete
Concludere la
configurazione
Fig. 13 By-clima App and WiFi network configuration
15