Mixing With Qu-16, Qu-24 And Qu-32 - ALLEN & HEATH Qu-16 Getting Started Manual

9.6 Mixing with Qu-16, Qu-24 and Qu-32

Press a green Sel
and pan using the SuperStrip controls. Press Fader Flip
to work with the mix GEQ using the faders.
Press a layer key to
access inputs, FX and
master fader strips.
Press both for the
Custom Layer. Any
combination of inputs,
FX, masters, DCAs and
MIDI strips can be
assigned here. Use the
space provided to label
the strips.
Hold and then press
Pre/Post
Assign
Sends on faders
Qu Mixer Getting Started Guide
key to work with channel processing
Sel Toggle individual sources
Press a Group
and access its master fader and processing.
The channel faders remain active. Groups are
not available on the Qu-16.
The Grp key lights purple if it is set to Group
mode. It lights blue if set to Mix mode.
Press the Processing
the screen to access preamp and processing
parameters for the selected channel using the screen.
Mix key to assign its routing
19
key and touch the top part of
Press the Routing
access routing parameters
for the selected channel.
Press the Fn key to work
with DCA and Mute Group
assignments and masters.
Press PAFL to listen to
individual signals using
headphones and view
their levels on the main
meters.
Press a blue Mix
work with mix sends,
routing and pre/post
fade settings.
The Master strip follows
the selected Mix.

Remember to return
to the main LR
you have finished
adjusting monitor or
effects levels.
Toggle all sources
AP10025 iss1
key to
key to
mix once