Wireless Control - ALLEN & HEATH Qu-16 Getting Started Manual

8. Wireless Control

The Allen & Heath Qu-Pad and Qu-You apps are available free from the Apple Store for iOS devices
including iPad, iPhone and iPod Touch. Qu-You is also available for Android devices.
Set up the Qu wireless network
router (wireless access point) with auto channel selection. Position it high up to avoid obstacles such as
people and equipment. Avoid locating it behind pillars or walls, near metal beams or on top of
loudspeakers. Go to the mixer
Qu mixer
Qu Network port

The Qu mixer firmware and app versions must be compatible. For example, V1.8
app will not run with V1.7 firmware. To avoid unexpected version mismatch we
recommend you turn off 'auto update' on your device. Download the latest Qu mixer
firmware from the Allen & Heath web site.

To prevent unauthorised control of your Qu mixer we recommend that you set a
router password to protect your wireless network.

The wireless device remembers the network settings. To prevent a guest
engineer using their own device on your network without password in future, select
your network in their device Settings Wi-Fi menu and use the 'Forget this network'
function.
Connect to the wireless network
for it to establish its broadcast. Go to your wireless device Settings screen, find and
connect to the mixer Wi-Fi network.
Start the app
in the list if it is recognised on the Wi-Fi network. Select this and touch Connect. A
login password is required if one has been set at the mixer. Read the app Help
Manual by touching the
Qu Mixer Getting Started Guide
- For best performance use a dual band (2.4 and 5GHz) wireless
Setup / Network screen and check that DHCP is enabled.
Wireless router
Cat5 cable

– The app opens in its Login page. You should see your Qu mixer
? button on its Login or Setup page.
Qu-Pad
is an engineer's mixing tool giving you the freedom
to walk the room or stage, listen to the sound and control all
aspects of the mix right where it is needed. Qu-Pad requires
the mixer Admin user password if one is set.
Qu-You
provides personal monitor mix control for
musicians on stage. The engineer can still keep an eye on
and control each mix at the Qu mixer at any time. A
password for Qu-You users can be set at the mixer.
Touch to select a mix.
Double tap to open the master PEQ, GEQ, Compressor.
Master fader and mute for the selected mix.
Assign channels to up to 4 local groups, each with its own
thumbwheel level control. Double tap a wheel to access its
source levels, pan and meters.
The currently selected mix name is displayed.
13
– Power up the router. Wait a few minutes
Control device
AP10025 iss1