Page 1
For Firmware V1.2 Check www.allen-heath.com for the latest firmware available Publication AP9031...
Page 2
Qu-16 Qu-Drive. USB ( USB, « Qu-Drive USB ‘ Qu Knowledgebase www.allen-heath.com. Qu-Drive . USB. Setup / Utility / Qu-Drive. USB. Qu-Drive: File System: Format, ‘OK’. www.allen-heath.com Qu16UpdtV1_10_2411.QUU .QUU. Qu-Drive Setup / Utility / Firmware. Update. USB, ALLEN&HEATH How to Update Qu Firmware Iss.2 Page 1 of 1...
Page 3
Limited One Year Manufacturer’s Warranty This product is warranted to be free from defects in materials or workmanship for period of one year from the date of purchase by the original owner. To ensure a high level of performance and reliability for which this equipment has been designed and manufactured, read this User Guide before operating.
IMPORTANT - Read these instructions before starting: Safety instructions Before starting, read the Important Safety Instructions printed on the sheets supplied with the equipment. For your own safety and that of the operator, technical crew and performers, follow all instructions and heed all warnings printed on the sheet and on the equipment panels. System operating firmware The function of the Qu mixer is determined by the firmware (operating software) that runs it.
1. Packed contents Qu-16 Mixer User Guide AP9031 Safety Sheets AP3345 – English AP7287 – French • AP8513 – Chinese Mains lead Check this • is correct for your territory Read this before starting Accessories available 19” Rack Ear Kit Part: QU-16-RK19 To mount the Qu-16 in a standard 19”...
Qu-16.. 1-10 Mic and Line inputs 1-16 2Trk Talk- back Kensington Lock Cable clamp dSNAKE USB B Mono Line Input – ¼” TRS (Tip, Ring, Sleeve) TRS. Microphone Input – Pin2 = hot 48V. 48V. Stereo Line Input – ST2 ¼” TRS (Tip, Ring, Sleeve) L/M.
Page 10
Mix Outputs – 0dBu. Ma +22dBu. Pin2 = hot 3 XLR (” ”) 1 (” ”). Main LR Output – AES Output – 2- XLR co AES (Audio En- gineering Society) AES. Setup / Audio / Output Patch. Alt Out –...
Page 11
100 to 240 V.AC 47 to 63Hz AC MAINS IN – – Torx T20. Fuse – Power ON/OFF – – ON/OFF. – – Home. Shut Down USB. ON/OFF. complete, press the ON/OFF switch to turn the mixer off. Qu-16 User Guide AP9031 iss.3...
Page 16
SuperStrip Processing. Sel. Mono input H1-16 = Source, Preamp, Gate, P Q, ompressor, Delay, Stereo linking Stereo input ST1-3 = Source, Trim, Gate, P Q, ompressor, Delay FX Return 1-4 = FX parameters, Mix1-10 = P Q, G Q, ompressor, Delay Main LR = G Q,...
Page 17
- Mic / Line dSNK - dSNAKE. Qu-DRV - USB. USB B - Mac. Qu-Drive USB ( Local ( Gain) dSNAKE ( Gain) Local ( Gain) - Mic / Line PADL SS dSNAKE ( Gain) - AR2412 AR84 AudioRack Qu dSNAKE CAT5.
Page 18
G G G a a a i i i n n n Peak Gain Polarity - Ø Preamp Insert FX / Back panel Delay - Post-Preamp Pre-EQ Post-EQ Post-All Insert Gain/Trim GATE COMP DELAY Linking ( Preamp – Gain/48V, Polarity Dynamics (Compressor Gate) - Side Chains Main mix –...
Page 19
12dB PEQ - - 20 LF ( LM ( HM ( HF ( Gain – o Frequency – a sweep o 20 Width – a 1/9 o Thres Ratio: (1:1) - ; (Inf) - 3:1. Compressor active GR = Gain Reduction Qu-16 User Guide AP9031 iss.3...
Page 20
Gain, Attack . Release ‘ ’ . Hard Knee . Soft Knee ‘ ’ ‘ ’ Insert FX / Back panel Delay GEQ ( - 20 31.5 + / -12 GEQ. Qu-16 User Guide AP9031 iss.3...
Page 22
Routing. Mute Routing. Sel. Routing Mute Pan c Sel. Master Strip: LR = Channel main pan FX send = Channel main pan Mono Mix1-4 = Disabled Stereo Mix5-10 = Channel send pan Width – Direct Output Trim .
Page 26
6.11 Select a Mix - Mix. . 16 Adjust Send levels – Adjust Send pans - Assign sends to the mix – ssign Sel, ssign. To toggle all assignments on or off - ssign Set sends Pre or Post Fade - Fade pre/post fade...
Page 27
Button – o ‘(Hold)’. – o – o – AES. – Apply / ancel – Apply Cancel – Mute Groups Routing. Qu-16 User Guide AP9031 iss.3...
F F F Recall ilter Recall Filter. Global Filter Filter selections are grouped according to input, output and type: – Global Filter, Inputs/FX (All CH1-16, ST1-3, FX1-4) - Safes screen Input patch (Local, dSNAKE, USB) Recall Safe Preamps (Gain/Pad/Trim/48V/Pol) .
-MIDI MIDI MIDI MIDI Mutes Faders and Pan Mix and FX Level, Pan, Assign, Pre/Post MIDI USB - Mute Group Assign, master Mute Apple ® Mac OSX 10.6 PAFL select . USB B Input channel source MIDI ...
8.11 USB, Qu-Drive . ‘ ’ USB. USB. ‘0‘. USB. Utility/Qu-Drive screen A Show stores the following: Current mixer settings USB. Mixer setup and preferences Show. Show USB. All Scenes All User Libraries USB Show. MIDI channel number Show.
Page 44
8.12 TCP/ IP- MIDI Qu-Pad Ipad. DHCP, 8.13 8.14 Qu-Drive USB ( Qu -Drive . Qu-Drive USB. USB : ‘OK’ . USB , “ Qu-Drive USB“ www.allen - heath.com . Qu-16 User Guide AP9031 iss.3...
Page 45
8.15 www.allen - heath.com .Quu Qu16UpdtV1_10_2411.QUU . Quu. Drive Setup/Utilities/Firmware Update. USB , Qu-16 User Guide AP9031 iss.3...
Page 46
Qu-16 MIDI Apple ® Mac USB B DAW (Digital Audio Workstation) Qu MIDI Allen & Heath DAW Mac, Mackie Control. - Qu Apple ® Mac. USB MIDI Windows ® Home /Home screen. v1.20 Allen - Heath . MIDI Qu-16 / MIDI MIDI channel.
Page 47
Qu-Pad iPad Qu-Pad Qu-16. . Qu-Pad . Qu-Pad Ipad Qu-Pad Ipad Fader levels, mutes, pan Aux and FX sends, routing and Pre/Post switching Input Preamp/USB selection Preamp Gain, Pad, Polarity and 48V HPF, Gate, PEQ, GEQ, Comp, Delays ...
Page 48
11.1 Mix - Reset Mix Settings ‘ “ MIC GAIN, Reset mix settings: Gates Source Preamp, Gain 28dB, 48V off ST1-3 trim 0dB HPF out, 100Hz PEQ and GEQ in, flat Gates out, thres -36dB, depth 20dB ...
Page 49
11.2 Hold for 3 seconds while powering up the mixer Source Preamp, Gain 28dB, 48V off ST1-3 trim 0dB Touch Screen Reset Setup HPF out, 100Hz PEQ and GEQ in, flat Gates out, thres -36dB, depth 20dB ...
Page 50
XLR Mic/Line 1 16 Mix1‐10 LR , XLR <75Ω ‐60 o +5dBu +4dBu = 0dB ‐5 to +60dB, 1dB steps +22dBu +19dBu ‐90 dBu (muted, 20‐20kHz) >5kΩ , 1/4" TRS Line TRS 1 16 ‐50 to +20dBu <75Ω ‐10 to +60dB, 1dB steps +4dBu = 0dB meter reading +29dBu +22dBu...
Need help?
Do you have a question about the Qu - 16 and is the answer not in the manual?
Questions and answers