Index Search (Audio Cd Only); Listening To Your Ipod - Yamaha CRX-D430 Owner's Manual

Playback operations
4
To finish checking or correcting the
programmed tracks, press and hold 6PROG
(or L PROGRAM/MEMORY).
To exit program playback mode
To return to the normal playback mode, press 6 PROG
when this unit is in the program edit mode. To recall the
programmed tracks, press 6 PROG (or L PROGRAM/
MEMORY when playback is stopped and then press
0 (or E
).
To clear the programmed order
Press and hold HCLEAR (or G CLEAR) when this unit
is in the program playback mode and playback is stopped.
Note
When you open the disc tray, the programmed order is cleared.

Index search (Audio CD only)

If your disc contains index numbers, you can start
playback from any desired index number.
Press E INDEX.
1
Enter the index number using the numeric
2
button(s) ( 5 ).
To cancel the index search
Press EINDEX again.
y
The index system is a method for sub-dividing tracks into smaller
divisions for easier search. If a disc contains an index, usually the
index mark ( ) is printed on the leaflet in the CD case.
Notes
• Not all discs have index numbers.
• If the selected index number does not exist in the disc, this unit
starts playback from the last index of the disc.
• For some discs playback may start slightly prior to the actual
designated index point.
10
En y The circled numbers and alphabets correspond to the ones on the attached sheet.

Listening to your iPod™

This unit equips the iPod terminal on the top panel where
you can directly station your iPod and control playback of
your iPod using the supplied remote control.
Only iPod (Click and Wheel), iPod nano, iPod mini,
and iPod touch are supported.
1
Plug your iPod to the iPod terminal on the
top panel of this unit.
Notes
• Use this unit with the iPod dock adapter (supplied with
your iPod or commercially available) appropriate for your
iPod. Unless your iPod is firmly stationed in the terminal,
audio signals may not be output properly.
• Do not connect any iPod accessories (such as headphones)
to your iPod when it is stationed in the terminal.
Press 2iPod (or press N INPUT repeatedly)
2
to select "iPod" and start playback.
y
If you plug your iPod while playing when any other source
is selected as the input source (or even when this unit is in
the standby mode), this unit automatically begins playback
of the iPod.
3
Select the iPod playback mode.
1 Press IFUNCTION and then 0ENTER (or
press K FUNCTION and then push the
multi jog dial ( J )).
2 Press 0
(or rotate the multi jog dial ( J ))
/
to select the desired mode and then press
0ENTER (or press the multi jog dial ( J )).
Mode Playback
information
Menu
Displayed on the
mode display of this unit.
Click Displayed on your
wheel iPod.
mode
iPod dock adapter
(supplied with your
iPod or commercially
available)
Playback control
By the remote control
of this unit
By the remote control
of this unit or your
iPod