Repeat Playback; Random Playback; Program Playback - Yamaha CRX-D430 Owner's Manual

Repeat playback

Press 8 REPEAT repeatedly to select the
desired repeat play mode.
The repeat playback mode changes as follows:
(Single repeat)
R1
(Folder repeat, MP3/WMA disc only)
Rf
Ra (Full repeat)
Normal playback
To repeat between two points
(A-B repeat)
During playback, press J A-B at the point
1
where you want to start repeat playback.
Press J A-B again at the point where you
2
want to end repeat playback.
To cancel A-B repeat
Press JA-B again.
Note
Repeat playback mode is canceled when the disc is removed.

Random playback

Press 7 RANDOM.
To cancel random play
Press it again to cancel random playback mode.
Note
Random playback mode is canceled when the disc is removed.

Program playback

Press 6 PROG (or L PROGRAM/MEMORY)
1
when playback is stopped.
This unit turns into the program edit mode.
2
Press 0ENTER or the multi jog dial ( J ).
Press the numeric button(s) (5) (or rotate
3
the multi jog dial ( J )) to enter the track/file
number you want to program, and then press
0ENTER (or push the multi jog dial ( J )).
CD Program
P01 T008
Program Programmed
number track
4
Repeat step 3 until you finish programing all
desired tracks.
You can program up to 40 tracks/files.
Notes
• For MP3 or WMA files recorded on a disc, the time of the
file is not displayed.
• For MP3 or WMA files recorded on a disc, the number
assigned to each file corresponds to the file sequence in
the disc, not in the individual folders.
Press and hold 6 PROG (or L PROGRAM/
5
MEMORY) to store the tracks you
programmed.
6
Press 0
(or E
program playback mode.
Example
CD
P02 T008
Program Currently
number played track
To check or correct the programmed
tracks/files
Press 6PROG (or L PROGRAM/MEMORY)
1
when this unit is in the program playback
mode and playback is stopped.
This unit turns into the program edit mode.
Press 0 ENTER or the multi jog dial ( J )
2
repeatedly to check the program order.
3
To correct a programmed track/file, display
the track number to be corrected, and use
the numeric button(s) ( 5 ) enter the track
number to be newly programmed.
To delete an unwanted track, press HCLEAR (or
G CLEAR).
Playback operations
01:23
Time of the track
) to start playback in the
01:23
Elapsed time
of the track
9
En