Transport - Unloading; Installation; General Rules; Electric Connection To The Supply Mains - Selco Genesis 60 Use And Maintenance Manual

4.0 TRANSPORT - UNLOADING

Never underestimate the weight of the equip-
ment, see 3.0 (TECHNICAL DATA).
Never make the cargo pass or leave it suspen-
ded over people or things.
Neither let the equipment or the single unit
fall, nor put it down with force.

5.0 INSTALLATION

5.1 GENERAL RULES

5.2 ELECTRIC CONNECTION TO THE SUPPLY
MAINS
POWER SOURCE
POWER SOURCE
The electrical system must be made by skilled
technicians with the specific professional and
technical qualifications and in compliance with
the regulations in force in the country where
the equipment is installed.
The welding power source supply cable is pro-
vided with a yellow/green wire that must
ALWAYS be earthed. This yellow/green wire
must NEVER be used with other voltage conductors.
* Verity the existence of the earthing in the used plant
and the good condition of the socket/s
* lnstall only plugs that are homologated according to
the safety regulations.
GENESIS 60 3x400 V
GENESIS 60 3x440 V

5.3 CONNECTING THE EQUIPMENT COMPONENTS

Keep to the safety regulations contalned in sec-
tion 1.0 WARNINGS-PRECAUTIONS-GENERAL
ADVICE.
Connect the componente carefully, in order to
avoid power losses.

5.4 SETTING UP

Fig. 3