Using The Torch; Inclination And Speed Of The Torch During Cutting; Maintenance And Inspection - Selco Genesis 60 Use And Maintenance Manual

4.0 USING THE TORCH

4.1 Inclination and speed of the torch during cutting

4.1.1 Puncturing
Immediately remove any material accumula-
ted on the tip or on the ceramic hood.
Caution: plasma cutting is a process with a high thermal
element, which takes both the piece to be cut and the
end parts of the torch to extremely high temperatures.
4.1.2 Circular cutting
4.1.3 Practical advice

5.0 MAINTENANCE AND INSPECTION