Problems - Causes; Possible Cutting Defects; Possible Electrical Faults; Routine Maintenance - Selco Genesis 60 Use And Maintenance Manual

6.0 PROBLEMS - CAUSES

6.1 POSSIBLE CUTTING DEFECTS

DEFECT
Fig. 4
CAUSE

6.2 POSSIBLE ELECTRICAL FAULTS

DEFECT
See chapter 2.1 for problems that generate an alarm
code.
If you have any doubts or problems, do not hesitate to
consult your nearest Selco technical service centre.

7.0 ROUTINE MAINTENANCE

Disconnect the power supply before every
operation!
For the maintenance or replacement of pla-
sma torch components, and/or earth cables:
* Disconnect the power supply before every operation.
* Check the temperature of the componente and make
sure that they are not overheated.
* Always use gloves in compliance with the safety stan-
dards.
* Use suitable spanners and tools.
* For torch maintenance, keep carefully to the direc-
tions shown under instructions for use of the torch
enclosed with this manual.
CAUSE