Trouble Shooting - Daiwa Seaborg 500MR Operating Instructions Manual

Trouble shooting

Symptom
The counter displays
Motor does not
Did not pull the lever to OFF
respond to the
position.
power lever
Unstable power source
Battery charge is low.
Cord worn or corroded
Counter display
does not appear.
Incorrect battery connection
Did not press
JIG/PICKUP BUTTON
Inverse counter
does not appear
Inverse counter is OFF
(default setting)
Jigging function
Power lever is at OFF
does not
respond
Pickup mode is selected
The reel jigs on
Low power voltage
its own.
Did not press
at surface
Auto stop
function does
Error for sinker weight or
not work
rocking of the boat
Line is elongated.
There are
Line length has increased
counter errors.
due to stretching.
Pickup does not
Speed setting is at zero
respond.
Contact your dealer if the reel does not function properly despite the above details being con-
firmed, in the event of other problems arising, and to order parts.
Possible causes
0.0 m.
RESET BUTTON
To do
It is a normal function to avoid over
winding. Press RESET BUTTON
continue winding.
Pull the lever to OFF and then move
forward again to start winding.
Use another power source, such as
electric reel specific batteries.
Recharge the battery.
Replace the cord.
Connect correctly.
It is normal. Press
INVERSE COUNTER
Using MODE BUTTON, change the
setting of this function.
Push the lever forward.
With MODE BUTTON, select the
jigging mode
Replace with a recharged battery.
Press RESET BUTTON
to zero with rig at the surface.
Adjust settings of auto stop function.
Reset the depth counter at the surface.
- Reset the counter.
- Revise the display.
- Re-enter line data.
Press MODE BUTTON
speed setting.
40
Ref.
page
to
BUTTON.
27,31
28,29
28,29
to reset depth
21,22
10-16
to select winding
23
9
2
2
5
2
27
2
20
20
20
35
26