Trouble Shooting - Daiwa Seaborg 500Fe Operating Manual

Trouble shooting

Symptom
The counter displays
Motor does not
respond to the
Did not pull the lever to OFF
power lever
position.
Unstable power source
Battery charge is low.
Cord worn or corroded
Counter display
does not appear.
Incorrect battery connection
Did not press
Inverse counter
INVERSE COUNTER BUTTON
does not appear
Jigging will not start
The power lever is set to the
even when JIGGING
OFF position.
BUTTON is pressed.
Low power voltage
The reel jigs on
its own.
Unstable power source
Did not press
at surface
Auto stop
function does
Error for sinker weight or
not work
rocking of the boat
Line is elongated.
Line length has increased
due to stretching.
There are
counter errors.
There was a large tension
change because of catch/loss
of a fish.
Contact your dealer if the reel does not function properly despite the above details being confirmed, in
the event of other problems arising, and to order parts.
Possible causes
0.0 m.
RESET BUTTON
To do
It is a normal function to avoid over
winding. Press RESET BUTTON
continue winding.
Pull the lever to OFF and then move
forward again to start winding.
Use another power source, such as
electric reel specific batteries.
Recharge the battery.
Replace the cord.
Connect correctly.
It is normal. Press
INVERSE COUNTER
Set a jigging speed using the power lever.
Replace with a recharged battery.
Use another power source, such as
electric reel specific batteries.
Press RESET BUTTON
to zero with rig at the surface.
Reset the depth counter at the surface.
Reset the counter.
Revise the display.
33
Ref.
page
to 8,18
BUTTON.
23-25
to reset depth
14,15
7
3
3
5
2
8
3
3
14
14
14
17