Trouble Shooting - Daiwa TANACOM 500 Operating Manual

Trouble shooting

Symptom
The counter displays
Motor does not
respond to the Did not pull the lever to OFF
power lever. position.
Unstable power source.
Battery charge is low.
Cord worn or corroded.
Counter display
does not appear.
Incorrect battery connection.
Inverse counter
Did not press
does not appear.
PICKUP
Jigging function
Power lever is at OFF.
does not
respond.
Pickup mode is selected.
The reel jigs on
Low power voltage.
its own.
Did not press
at surface.
Auto stop
function does
Error for sinker weight or
not work.
rocking of the boat.
Line is elongated.
There are
Line length has increased
counter errors.
due to stretching.
Pickup does not
Speed setting is at zero.
respond.
Contact your dealer if the reel does not function properly despite the above details being con-
firmed, in the event of other problems arising, and to order parts.
Possible causes
0.0 m.
BUTTON.
RESET BUTTON
To do
It is a normal function to avoid over
winding. Press RESET BUTTON
continue winding.
Pull the lever to OFF and then move
forward again to start winding.
Use another power source, such as
electric reel specific batteries.
Recharge the battery.
Replace the cord.
Connect correctly.
It is normal. Press MEMO BUTTON
Push the lever forward.
With MODE BUTTON, select the
jigging mode.
Replace with a recharged battery.
Press RESET BUTTON
to zero with rig at the surface.
Adjust settings of auto stop function.
Reset the depth counter at the surface.
- Reset the counter.
- Revise the display.
- Re-enter line data.
Press MODE BUTTON
speed setting.
34
Ref.
page
to 19,20
9
2
3
5
2
22
23
25-27
3
to reset depth
18
19,20
18
18
30
10-15
to select winding
21