Daiwa SEABORG 1000 MT Operating Manual
  1. Manuals
  2. Brands
  3. Daiwa Manuals
  4. Fishing Equipment
  5. SEABORG 1000 MT
  6. Operating manual

Daiwa SEABORG 1000 MT Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OPERATING MANUAL
Thank you for purchasing a SEABORG 1000MT. To take full advantage of the reels
many useful functions, please read this manual carefully before using. Retain this
manual for future reference.
Reference
Reference
pursuetheoutdoors.com/schematics

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SEABORG 1000 MT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Daiwa SEABORG 1000 MT

Summary of Contents for Daiwa SEABORG 1000 MT

  • Page 1 OPERATING MANUAL Thank you for purchasing a SEABORG 1000MT. To take full advantage of the reels many useful functions, please read this manual carefully before using. Retain this manual for future reference. Reference Reference pursuetheoutdoors.com/schematics...
  • Page 2 Index Caution 9. Winding speed indicator   Winding speed display   Precautions 10. Remaining time to auto stop Power source   Displaying of the remaining time to auto stop   How to connect the reel to the power source 11. Chumming timer winding 30,31   About the power source   Chumming timer winding 30,31...
  • Page 3 Caution Precautions 1.This product generates weak electro-magnetic waves while its power is ON, which could cause malfunction of medical equipment such as hearing aids, pacemakers and other devices. Wearers of heart pacemakers could experience variations in heartbeat or dizziness. So please, be sure to ask the manufacturer or dealer of your specific medical equipment about any potential hazards posed by the effects of electro-magnetic waves.
  • Page 4 Power source Black How to connect the reel to the power source Attach the cord clips to the battery. Red covered clip is the plus (+), and the black covered clip is the minus (-). Insert the connector into the reel. After this, the display appears as below.

  • Page 5: Using The Reel

    Using the Reel Do not jerk your rod to free a lure or sinker stuck on the bottom. Pull the line taught with a gloved hand and cut it. After maintenance, be sure to loosen the drag and store the reel in a dry place.
  • Page 6 Maintenance About maintenance This is a washable reel. Wash away salt residue and grit after fishing Maintenance procedure Wash the reel with a dish washing detergent and a soft sponge. Do not use solvents. Do not use soap or other detergents. Other soaps or solutions may damage the reel both externally and internally.
  • Page 7 Maintenance Handling and maintenance of the power cord Follow the restrictions below to avoid cord problems. Do not cut or connect your cord by yourself as it can cause unintended problems. Do not hang the reel Do not wind the power by the power cord.

  • Page 8: Names Of The Buttons And The Display

    Names of the buttons and the display MODE BUTTON RESET BUTTON SPEED/POWER RANGE INDICATOR SHIFT BUTTON INVERSE COUNTER BUTTON JIG/PICKUP BUTTON Mode display Depth counter Inverse counter (winding speed display) Jigging display Chumming timer (Power indicator, time to wind up, timer display)    MODE BUTTON Press the...
  • Page 9 Names of the buttons and the display JIG/PICKUP BUTTON Selection between pickup and jigging can be done in the mode setting display.(One of them should necessarily be chosen.) Pickup -You can wind only while pressing this button. This function is useful to wind up line slack and attract fish. - Winding speed can be changed with the mode setting display.

  • Page 10: Names And Functions Of Each Part

    Names and functions of each part Free spool adjustment strong weak Power lever tighten loosen Waterproof tournament drag Clutch Level wind Enclosed items Storage bag Power cord pursuetheoutdoors.com/schematics Rod Clamp  Levelwind Reel guard oil threader Manual CD-R...
  • Page 11 Names and functions of each part Free spool adjustment    - It adjusts brake tension on the spool to prevent backlash or line slack caused by dropping the line with hook and sinker.    Power lever - You can freely adjust winding power, or winding speed, from zero(ON/OFF) to maximum, by 32 steps, by using the lever.

  • Page 12: Line Data Input

    Line data input (When line length is known) This method is used when the line length is known before winding. In the example below, PE 6 – 1000m is wound. Run line through the levelwind guide and tie it onto the spool. Levelwind Guide The levelwind threader makes this process easier.

  • Page 13: Reset Button

    Line data input (When line length is known) Pull the lever back to the OFF position, after winding. 1.Do not wind the end of the line onto the spool because it causes incorrect length calculation. Move the power lever to OFF position, and wind manually when nearing the end of the line.

  • Page 14: Mode Button

    Line data input (With backing line 1) This method requires use of Daiwa braided line that is color coded to show length and has a total length greater than 100 m. Run the backing line through the levelwind guide and tie it onto Levelwind Guide the spool.
  • Page 15 Line data input (With backing line 1) As indicated by the lineʼs color coding, wind the line up until the remaining line is 100m.  With the power lever moved forward, changes into a tension indicator. Keep line tension between 4 and 5 while winding. For your safety, shift to the power range mode before beginning to wind line.

  • Page 16: Mode Set Button

    Line data input (With backing line 2) This method is applied to data re-input which is to be made after the main line is wound up. This method requires a main line of 100m or longer specific length. Connect the battery to the reel. Press the MODE SET BUTTON for 5 seconds, changing the...
  • Page 17 Line data input (With backing line 2) Press the RESET BUTTON for 2 seconds to show 100.0 the upper counter. Wind up the 100m of line you pulled from the reel. This completes the procedure. 1.Do not wind the end of the line onto the spool because it causes incorrect length calculation.
  • Page 18 Functional setting operation (1. Mode setting display) How to set the many functions available Many useful functions can be accessed with the mode button. Press the MODE BUTTON to choose a display. depth indication display Each press of the MODE BUTTON changes the display to the next function.
  • Page 19 Functional setting operation (1. Mode setting display) Use the power lever to set numerical values. Power lever  At its MAX position, numbers count upward rapidly. At the OFF position, numbers count downward rapidly.  Around mid position, numbers change at a slower pace. Press MODE BUTTON to complete the setting.
  • Page 20 Functional setting operation (2. How to use the SHIFT BUTTON) Pressing the SHIFT BUTTON enables you to change the electric reel winding mode between the Speed range mode and the Power range mode. Attention 1.The motor stops temporarily at the moment of switchover between the Speed range mode and the Power range mode.
  • Page 21 Functional setting operation (3. Before you begin fishing) Surface depth setting Before you begin fishing, make sure the counter is set to zero at the waterʼs surface. This is extremely important to ensure accurate fishing depth readings. Connect the reel to the battery, put the line through all the guides, and prepare your terminal rig.
  • Page 22 Functional setting operation (4. Auto stop function) Auto stop setting The Auto stop depth may be set to meet your own specific needs. - Auto stop adjusts to operate at depths from 1 m to 5 m (in 10 cm increments). - It prevents accidentally winding swivels, terminal rigs etc.
  • Page 23 Functional setting operation (4. Auto stop function) Auto stop Auto stop automatically brings your terminal rig to the surface, stopping consistently at your pre-set depth preference. It eliminates the need to constantly monitor depth as it comes up. - The auto stop function assists when winding with the power lever, jigging, or winding with the chumming timer. - After the rig is ready, reset the depth counter to zero by pressing the RESET BUTTON.
  • Page 24 Functional setting operation (5. Line feeding function) Line feeding function The line feeding function lets our line with the motor assisting the spool. - The line feeding mechanism begins to work at a depth of 2.5 m below the pre-set auto stop depth. - When Live Lining mode is ON, line feeding will not automatically start.
  • Page 25 Functional setting operation (6. Pickup speed setting) Pickup speed preference Press MODE BUTTON. If the display is at display, then move the power lever or press RESET BUTTON to show the display shown on the right. Press MODE BUTTON again. This display is the pickup setting display.
  • Page 26 Functional setting operation (7. Inverse counter) Inverse counter Two counters are better than one. This reel has counters from both the surface and from the bottom. The default inverse counter setting is OFF. To turn it ON, see page 28. In the following example, intended fishing range is 94 m, which is 6 m from the bottom.
  • Page 27 Functional setting operation (8. Jigging) Jigging Jigging is an extremely valuable function. After setting your preferences, pressing the JIG/PICKUP BUTTON starts the function. Speed of the jigging can be adjusted with the power lever. Press the MODE BUTTON to show pickup / jigging display. (When jigging is chosen, the pickup function cannot be used.) Jig/pickup Jigging pattern is selected with the power lever.
  • Page 28 Functional setting operation (8. Jigging) Jigging master You can choose the jigging pattern, range, waiting time and length you require. - Pressing the JIG/PICKUP BUTTON, starts jigging, with the display showing the indicator. (Pressing the button once more cease jigging.) The power lever controls jigging speed. - Shifting of jigging speed is done easily with the lever control.
  • Page 29 Functional setting operation (8. Jigging) 3. Waiting time You can choose the waiting time between jigs. The interval time is set in seconds. Example) Three-step jigging Three-step jigging 5 seconds interval time (Preference setting) Interval time (5sec) Three-step jigging Interval time (5sec) - If jigging time is longer than the chumming timer setting, then the chumming timer setting takes priority and will wind up the line.
  • Page 30 Functional setting operation (9. Winding speed indicator) Winding speed display In the default setting, the lower area counter displays the winding speed. The chumming timer display area shows the remaining time until the auto stop is reached. (p. 29) The inverse counter numbers can be changed to indicate winding speed.
  • Page 31 Functional setting operation (10. Remaining time to auto stop) Displaying of the remaining time to auto stop Two counters are better than one. This reel has counters from both the surface and from the bottom. When the display is set to indicate the actual speed, the chumming timer display portion indicates the remaining time before it reaches the auto stop position.
  • Page 32 Functional setting operation (11. Chumming timer winding) Chumming timer winding The right timing for the best results. After a pre-determined amount of time has passed, the reel starts winding automatically. - After pre-set 5 minutes have passed, the reel automatically winds up.
  • Page 33 Functional setting operation (11. Chumming timer winding) Press MODE BUTTON twice. - When the display goes back to depth counter, then the procedure is completed. - The     indicator is seen on the display. - The time set can be checked by pressing the INVERSE COUNTER BUTTON.
  • Page 34 Functional setting operation (12. Display recalibration) Display revision You can recalibrate the counter should it not indicate an accurate depth compared to depth markings on your line. Example below is the case in which, though the counter shows 103 m, color markings on the line indicate 100 m. (Depth counter) Press MODE BUTTON...
  • Page 35 Functional setting operation (13. How to fix the Rod Clamp) When using a metal rod butt or fishing for large, hard-pulling fish, always secure the reel with a Rod Clamp. (Using the Rod Clamp, it is possible to clamp rods with diameters of 23-34mm) Insert the Bolt in the clamp setting hole, and fix it by tightening the Nut and the Washer.

  • Page 36: Useful Functions

    Useful functions Various alarms Many kinds of information are indicated by audible alarms. Power lever alarm - Placing the Power lever at MAX or OFF positions evokes an alarm. Auto stop alarm - While winding up, starting 6 m below the auto stop depth, an alarm beeps at two meter intervals. Upon reaching the auto stop depth, a long alarm sounds.

  • Page 37: Reel Specifications

    Product name SEABORG 1000MT Product code 40801389 Gear ratio(manual winding) 2.4 : 1 Weight (g/oz) 1,425 g / 50.3 oz Max Drag power (kg/lb) 20kg/44.1lb Line Capacity (m) DAIWA BRAIDED MONO BRAIDED PE6(80lb)-1000m-(1100yds) 30lb-700m-(770yds) 60lb-1000m-(1100yds) PE8(100lb)-800m-(880yds) 40lb-500m-(550yds) 80lb-800m-(880yds) PE10(120lb)-600m-(660yds) 100lb-600m-(660yds)

  • Page 38: Parts List

    Parts List SEABORG 1000MT ６ ５１ ５６ ５５ ３６ ３９ ４１ ３７ ４３ ４５ ４８ ５３ ６９ ７０ ６５ ７２ ５ ４２ ３８ ４４ ４６ ４９ ５２ ３１ ４０ ７１ ７３ ６６ ４７ ５０ ７４ ６７ ７５ １３１２ １４ １５ ６８...

  • Page 39: Troubleshooting

    Trouble shooting Ref. Symptom Possible causes To do page It is a normal function to avoid over The counter displays winding. Press RESET BUTTON continue winding. Motor does not Pull the lever to OFF and then move Did not pull the lever to OFF respond to the forward again to start winding.

  • Page 40: Limited Warranty Terms

    GARANTIE La garantie appliquée est celle en vigueur dans le pays dʼachat du moulinet. Pour la France, seuls, les revendeurs et le service après-vente de la société Daiwa-France sont habilités pour prendre en charge une éventuelle garantie. En règle générale la garantie expire après un an ou 200 heures dʼutilisation.

Table of Contents

Save PDF