SOYO SY-K7V DRAGON Plus! User Manual page 147

Enable audible prompt checkbox turns on/off an audible alarm of an event
(typically a drive failure, or completion of rebuild or synchronization).
Popup message box checkbox turns on/off the appearance of an event message
box that would typically indicates a drive failure, or completion of rebuild
or synchronization.
Use log file checkbox allows writing operating event logs of the array
activity (alerts and status reports) to a given file name and directory.
If a file name is used but the path left blank, the default directory is
the same as the FastCheck Utility (typically C:\Program
Files\Promise\FastTrak100-Lite).
Use NT system event log checkbox is greyed out under Windows
95/98/2000/Millennium automatically. Under Windows NT4, it
permits user to write array logging to NT's own event log.
1. To view FastCheck events under Windows NT, go to
Start/Programs/Adminstrative Tools/Event Viewer.
2. In the Event Viewer, choose "Log" from the menu bar, then
check "Application." Any events generated by FastCheck will
appear under the Source column as "FastCheck."
On Errors section offers four radio button choices for the user to select
what procedure they would like to perform if an Error is detected
during automatic/manual Rebuilds or manual Synchronization.
There are three types of errors that FastTrak100-Lite detects -- a
data mismatch between the primary and secondary drive, a
physical media error on source or target drive, or a total disk failure.
The options for handling Errors are as follows:
Abort: stops any Synchronization or Rebuild process if an error is
encountered.
143