SOYO SY-K7V DRAGON Plus! User Manual page 23

Hardware Installation
Step 4 Connect cables, case wires, and power supply
A. IDE Device Installation (HDD, CD-ROM)
This Motherboard offers two primary and secondary IDE device connectors
(IDE1, IDE2). It can support up to four high-speed Ultra DMA
33/66/100HDD or CD-ROM.
Connect one side of the ATA66/100 flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1) or secondary (IDE2)
directionally keyed IDE connector on the Motherboard. The ATA66/100
cable is backward compatible with ATA33 HDDs.
This Motherboard can support up to 8 HDDs.
There are four HDD connectors (IDE1, IDE2, IDE3, IDE4) on motherboard.
IDE3 & IDE4 are provided for IDE RAID function. Please refer to Step4-G
on page 34 and the FASTTRAK-100-LITE Manual for more information on
IDE RAID function.
SDRAM
SDRAM
□
19
SY-K7V DRAGON Plus!
Pin -1
IDE 1 IDE 2
Primary Secondary
IDE IDE
Pin -1
IDE 3 IDE 4