Jet PRSWSH-1316PTL User Manual page 13

Fitting the Hose connections
WARNING! Do not use hot water. Using hot water will damage your machine and void all warranty.
1. Self-Suction Bleeder
valve
1. Attach "garden hose connector" to "water in" connection on the water pump (image 1 &2).
2. Connect water supply to "garden hose connector".
3. Remove the clear plastic cover from the "water out" connector (image 3).
4. Connect the end of the "high pressure hose" to "High pressure connection" on the water pump outlet
(image 4& 5).
Connecting the Battery (if equipped)
Locate the two battery plugs near the battery (if equipped) and connect by pushing them together.
NOTE! The battery is self-charging through general use however there may be need on occasion to remove the
battery and charge it with an appropriate charger or jump start the engine(selected 4-Stroke petrol and Diesel
versions only).
180714125800
2. Garden hose connector
(w ater in)
3. Detergent injection inlet
4. High Pressure
connection (water out)
5. High pressure hose
12
12