Rear Panel - Marantz VC5400/PMD970 User Manual

Rear Panel

OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
RS232C Terminal
Control terminal for use by
custom installers.
* REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component uslng a supplled System Control cable, you
can remotely operate the components as a single system.
• When connecting to component with a remote sensor, be sure to connect the "REMOTE CONTROL IN" jack of
this DVD player to the "REMOTE CONTROL OUT" jack of the component with the remote semsor.
• When connecting to component which is not equipped with a remote sensor, be sure to connect the component to
the "REMOTE CONTROL OUT" jack of this DVD player.
** Remote switch
• When using this DVD player independently, set this switch to "INTERNAL". When using this DVD player in a sys-
tem with a Marantz receiver equlpped with a remote sensor, set the switch to "EXTERNAL".
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
8
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
**REMOTE CONTROL
INTERNAUEXTERNAL
Switch
* REMOTE CONTROL IN/OUT jack
VIDEO OUT
Connect to a TV with video inputs.
5.1 CHANNEL AUDIO OUT
Connect to a 5.1 channel receiver
– center speaker connection
– subwoofer connection
– front speakers connections
– rear (surround) speakers connections
S-VIDEO OUT
Connect to a TV with S-Video inputs.
AC Power Cord
Plug into the power source.