Marantz DV6600 Service Manual

Super audio cd/dvd player

Hide thumbs Also See for DV6600:

User manual (36 pages)

Specifications (2 pages)

Full line catalog (39 pages)

Table of Contents

Quick Links

Summary of Contents for Marantz DV6600

Page 1: Table Of Contents
Service DV6600 / N1B/N1S Manual Super Audio CD / DVD Player STANDBY POWER ON/STANDBY HDMI AUDIO EX. OPEN/CLOSE TABLE OF CONTENTS SECTION PAGE TECHNICAL SPECIFICATIONS....................1-1-1 SERVICE HINTS AND TOOLS....................1-2-1 WARNING AND LASER SAFETY INSTRUCTIONS ..............1-2-2 LASER BEAM SAFETY PRECAUTIONS..................1-2-3 IMPORTANT SAFETY PRECAUTIONS ..................
Page 2 Parts for your MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent. ORDERING PARTS : Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be speciﬁ ed.
Page 3: Technical Specifications
TECHNICAL SPECIFICATIONS SPECIFICATIONS PIN CONNECTION (A/V EURO CONNECTOR) SIGNAL SYSTEM PAL colour APPLICABLE DISCS (1) DVD-Video/DVD-Audio Discs 1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs, 2-layer 12cm double-sided discs (1 layer per side) Contacts, signal levels and impedances 1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs, 2-layer 8cm double-sided discs (1 layer per side) Contact 1 (2) Super Audio CD...
Page 4 ABOUT THE DISCS Playable Discs Recorded Playable Disc size Disc types Region code Mark (logo) signals discs Digital audio Example 12 cm Group 1 Group 2 DVD-Audio Digital video Track 1 Track 2 Track 3 Track 4 Track 1 Track 2 8 cm * 2, 3, 5 (MPEG2)
Page 5: Service Hints And Tools
SERVICE HINTS AND TOOLS SERVICE HINTS SERVICE TOOLS Audio signals disc 4822 397 30184 Disc without errors (SBC444)+ Disc with DO errors, black spots and fingerprints (SBC444A) 4822 397 30245 Disc (65 min 1kHz) without no pause 4822 397 30155 Max.
Page 6: Warning And Laser Safety Instructions
WARNING AND LASER SAFETY INSTRUCTIONS WARNING WAARSCHUWING All ICs and many other semi-conductors are Alle IC’s en vele andere halfgeleiders zijn susceptible to electrostatic discharges (ESD). gevoelig voor elektrostatische ontladingen Careless handling during repair can reduce (ESD). life drastically. Onzorgvuldig behandelen tijdens reparatie When repairing, make sure that you are kan de levensduur drastisch doen connected with the same potential as the...
Page 7: Laser Beam Safety Precautions
LASER BEAM SAFETY PRECAUTIONS This DVD player uses a pickup that emits a laser beam. Do not look directly at the laser beam coming from the pickup or allow it to strike against your skin. The laser beam is emitted from the location shown in the figure. When checking the laser diode, be sure to keep your eyes at least 30 cm away from the pickup lens when the diode is turned on.
Page 8: Important Safety Precautions
IMPORTANT SAFETY PRECAUTIONS Product Safety Notice K. Crimp type wire connector The power transformer uses crimp type connectors Some electrical and mechanical parts have special which connect the power cord and the primary side safety-related characteristics which are often not evi- of the transformer.
Page 9 Safety Check after Servicing Examine the area surrounding the repaired location Chassis or Secondary Conductor for damage or deterioration. Observe that screws, parts, and wires have been returned to their original positions. Afterwards, do the following tests and con- Primary Circuit Terminals firm the specified values to verify compliance with safety standards.
Page 10: Standard Notes For Servicing
STANDARD NOTES FOR SERVICING Circuit Board Indications Pb (Lead) Free Solder 1. The output pin of the 3 pin Regulator ICs is When soldering, be sure to use the Pb free solder. indicated as shown. How to Remove / Install Flat Pack-IC Top View Bottom View 1.
Page 11 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
Page 12 2. Installation With Iron Wire: 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.
Page 13 Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.
Page 14: Cabinet Disassembly Instructions
CABINET DISASSEMBLY INSTRUCTIONS 1. Disassembly Flowchart Note: (1) Identification (location) No. of parts in the figures This flowchart indicates the disassembly steps to gain (2) Name of the part access to item(s) to be serviced. When reassembling, (3) Figure Number for reference follow the steps in reverse order.
Page 15 (S-1) [7] Rear Panel [1] Top Cover (S-4) (S-5) (S-4) (S-1) (S-6) (S-4) (S-1) Fig. D1 Fig. D4 [3] Tray Panel (L-4) (S-8) CN2002 (L-4) [8] DVD Main CBA Unit [9] 5.1ch Amp CBA (L-2) CN7101 (S-9) (S-7A) CNS01 [10] Jack PCB (L-1) (S-7B) Holder...
Page 16 (S-10) (S-10) [11] DVD Mechanism Fig. D6 (S-11) (S-11) (S-12) [12] AV CBA Fig. D7 (S-13) (S-13) [13] Loader Base [14] Main PCB Holder (S-14) Fig. D8 1-5-3 E61M7DC...
Page 17 3. How to Eject Manually 1. Remove the Top Cover. 2. Rotate the roulette in the direction of the arrow as shown below. View for A Rotate this roulette in the direction of the arrow 1-5-4 E61M7DC...
Page 18: How To Initialize The Dvd Player
HOW TO INITIALIZE THE DVD PLAYER To put the program back at the factory-default, initialize the DVD player as the following procedure. 1. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order. Fig. a appears on the screen. "...
Page 19: Firmware Renewal Mode
FIRMWARE RENEWAL MODE 1. Turn the power on and remove the disc on the tray. 5. After programming is finished, the tray opens automatically. Fig. e appears on the screen and 2. To put the DVD player into version up mode, press the checksum in (*2) of Fig.
Page 20: Troubleshooting
TROUBLESHOOTING FLOW CHART NO.1 The power cannot be turned on. See FLOW CHART No.2 <The fuse blows out.> Is the fuse normal? Is normal state restored when once unplugged Check if there is any leak or short-circuiting on the power cord is plugged again after several seconds? primary circuit component, and service it if defective.
Page 21 FLOW CHART NO.7 P-ON+3.3V is not outputted. (P-ON+11V is outputted normally.) Check D1008, C1007, C1038, L1007 and the Is 3.3V voltage supplied to the collector of Q1011? periphery circuit, and service it if defective. Replace Q1011 or R1067. FLOW CHART NO.8 EV+5V is not outputted.
Page 22 FLOW CHART NO.12 -FL is not outputted. Refer to "FLOW CHART NO.11" Is F1(-15V) outputted normally? <The fluorescent display tube does not light up.> Check D1003 and periphery circuit, and service it Is approximately -22V voltage supplied to the if defective. anode of D1003? Check Q1013 and periphery circuit, and service it Is approximately -20V voltage outputted to the...
Page 23 FLOW CHART NO.15 The disc tray cannot be opened and closed. (It can be done using the remote control unit.) Replace the "OPEN/CLOSE" button (SW2188). Is the normal control voltage inputted to Pin(4) of IC2001? Refer to "FLOW CHART NO.13" <The key operation is not functioning.>...
Page 24 FLOW CHART NO.21 Picture does not appear normally. Set the disc on the disc tray, and playback. Replace the DVD Main CBA or DVD Mechanism. Are the video signals outputted to each pin of CN1601 on the AV CBA? CN1601 1PIN S-Y(I) CN1601...
Page 25 FLOW CHART NO.22 Audio is not outputted normally. Set the disc on the disc tray, and playback. Replace the DVD Main CBA or DVD Mechanism. Are the analog audio signals outputted to each pin of CN1601 on AV CBA? CN1601 13PIN AUDIO(L) CN1601 15PIN AUDIO(R) Check each line between each pin of CN1601 Are the analog audio signals inputted to each pin...
Page 26 FLOW CHART NO.23 Audio is not outputted. (JK7101) Set the disc (with 5.1ch Audio) on the disc tray, and playback. Are the analog audio signals outputted to each pin of CN7102 on 5.1ch Amp CBA. Replace the DVD Main CBA or DVD Mechanism. CN7102 15PIN FRONT(L) CN7102 13PIN FRONT(R) CN7102 11PIN SURROUND(L)
Page 27: Block Diagrams
BLOCK DIAGRAMS System Control / Servo Block Diagram E61M7BLS 1-9-1...
Page 28 Digital Signal Process Block Diagram E61M7BLD 1-9-2...
Page 29 Video-1 Block Diagram E61M7BLV1 1-9-3...
Page 30 Video-2 Block Diagram 1-9-4 E61M7BLV2...
Page 31 Audio Block Diagram 1-9-5 E61M7BLA...
Page 32 SACD Block Diagram E61M7BLSA 1-9-6...
Page 33 Power Supply Block Diagram E61M7BLP 1-9-7...
Page 34: Schematic Diagrams / Cba's And Test Points
SCHEMATIC DIAGRAMS / CBA’S AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Page 35 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE FUSE. 2. CAUTION: Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F1001) is blown, first check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply.
Page 36 DVD Main 1/7 Schematic Diagram 1 NOTE: Either IC461 or IC462 is used for DVD MAIN CBA UNIT. 1-10-3 E61M7SCD1...
Page 37 DVD Main 2/7 Schematic Diagram 1-10-4 E61M7SCD2...
Page 38 IC101 Voltage Chart ~ : Voltage is not consistent ----- : Not used Unit : Volts PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP PIN.NO PLAY STOP ----- ----- -----...
Page 39 DVD Main 3/7 Schematic Diagram 1-10-6 E61M7SCD3...
Page 40 DVD Main 4/7 Schematic Diagram 1-10-7 E61M7SCD4...
Page 41 DVD Main 5/7 Schematic Diagram 1-10-8 E61M7SCD5...
Page 42 DVD Main 6/7 Schematic Diagram 1-10-9 E61M7SCD6...
Page 43 DVD Main 7/7 Schematic Diagram 1-10-10 E61M7SCD7...
Page 44 AV 1/3 Schematic Diagram CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! NOTE: If Main Fuse (F1001) is blown , check to see that all components in the power supply For continued protection against fire hazard, The voltage for parts in hot circuit is measured using circuit are not defective before you connect the AC plug to the AC power supply.
Page 45 AV 2/3 Schematic Diagram 1-10-12 E61M7SCAV2...
Page 46 AV 3/3, Function & LED Schematic Diagram FL2001 MATRIX CHART SACD PSCAN REPEAT GROUP TITLE SACD PSCAN REPEAT TITLE GROUP HD VCD 1-10-13 E61M7SCAV3...
Page 47 5.1CH AMP Schematic Diagram 1-10-14 E61M7SCA...
Page 48 AV CBA Top View CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! NOTE: If Main Fuse (F1001) is blown , check to see that all components in the power supply For continued protection against fire hazard, The voltage for parts in hot circuit is measured using circuit are not defective before you connect the AC plug to the AC power supply.
Page 49 AV CBA Bottom View CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! NOTE: If Main Fuse (F1001) is blown , check to see that all components in the power supply For continued protection against fire hazard, The voltage for parts in hot circuit is measured using circuit are not defective before you connect the AC plug to the AC power supply.
Page 50 FUNCTION CBA Top View FUNCTION CBA Bottom View 1-10-17 BE6182F01013D...
Page 51 LED CBA Top View LED CBA Bottom View 1-10-18 BE6182F01013E...
Page 52 5.1CH AMP CBA Top View 5.1CH AMP CBA Bottom View 1-10-19 BE5932F01011...
Page 53: Waveforms
WAVEFORMS Pin 8 of CN1601 Pin 15 of CN1601 AUDIO(R) AUDIO(R) 0.5ms 0.5ms VIDEO-Y VIDEO-Y 0.1V 0.1V 20µs Pin 10 of CN1601 Pin 18 of CN1601 VIDEO-C VIDEO-C 0.1V 0.1V 20µs SPDIF SPDIF 0.1µs C1402 PLUS LEAD NOTE: Input CD: 1kHz PLAY (WF4~WF6) DVD: POWER ON (STOP) MODE VIDEO-CVBS...
Page 54: Wiring Diagram
WIRING DIAGRAM 1 SCLOCK 2 GND 3 EXTRG0 4 EV+3.3V(D) 5 SDATA 6 RESET 7 NU 8 GND 9TRCDATA1 9 NU 10 NU P-ON+5V 20 11 NU CD/DVD 19 12 NU D 18 13 NU A 17 C 16 B 15 VIDEO-Y(I) E 14 I/P-SW...
Page 55: Ic Pin Function Descriptions
IC PIN FUNCTION DESCRIPTIONS IC2001 [ PT6313-S-TP(L) ] Signal In/Out Name Function Name FP-CLK Clock Input FP-STB Serial Interface Strobe Key Data 1 Input Key Data 2 Input Power Supply a / KEY-1 Segment Output / Key Source-1 b / KEY-2 Segment Output / Key Source-2 Segment Output / Key c / KEY-3...
Page 56: Lead Identifications
LEAD IDENTIFICATIONS 2SA1015-Y(TE2 F T) 2SA1015-Y(TPE2) 2SC1815-GR(TE2 F T) 2SC2120-Y(TE2 F T) 2SC1815-GR(TPE2) 2SC2120-Y(TPE2) 2SC1815-Y(TE2 F T) 2SC2236-Y-TPE6 C 2SC1815-Y(TPE2) KTA1266(Y) KTA1267(Y) KTA1266-Y-AT/P KTA1267Y-AT/P KTC3203(Y) KTC3199(GR,Y) KTC3203-Y-AT/P KTC3199-(GR,Y)-AT/P KTC3205(Y) BN1L3Z(P) KTC3205-Y-AT/P KRA105M-AT/P BA1F4M-T KRA110M-AT/P KRC103M KRA110M KRC103M-AT/P KRA103M-AT/P E C B E C B NJM4580M-TE1 FAN431AZXA...
Page 57: Exploded Views
EXPLODED VIEWS Cabinet See Electrical Parts List for parts with this mark. Some Ref. Numbers are not in sequence. 2L011 2L109 2L011 2L011 5.1ch Amp CBA 2L011 2L108 2B21 2L011 2L105 2L021 2L021 2L021 2L106 JK1405 2L105 JK1401 JK1404 JK1202 SW2081 2L021 IC1204...
Page 58 Packing Unit 1-15-2 E61M7PEX...
Page 59: Parts List
90M-TS002500R TRANSF. OR BCK-25-069D OR LTT00EPXB022 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS. NOTE ON SAFETY : Symbol Fire or electrical shock hazard. Only original parts should be used to replaced any part marked with symbol Any other component substitution (other than original type), may increase risk of fire or electrical shock hazard.
Page 60 90M-YU002070R FPC 16P FFC 5.1CH CBA TO MAIN WX1E61E2-002 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS. NOTE ON SAFETY : Symbol Fire or electrical shock hazard. Only original parts should be used to replaced any part marked with symbol Any other component substitution (other than original type), may increase risk of fire or electrical shock hazard.

This manual is also suitable for:

Dv6600/n1b Dv6600/n1s

Marantz DV6600 Service Manual

Quick Links

TABLE OF CONTENTS

Related Manuals for Marantz DV6600

Summary of Contents for Marantz DV6600

This manual is also suitable for:

Table of Contents