Kohler 5ERKM Service Manual page 7

Notice
NOTICE
This generator set has been
rewired from its nameplate voltage
to
NOTICE
Voltage reconnection. Affix a notice
to the generator set after reconnecting
the set to a voltage different from the
voltage on the nameplate.
voltage reconnection decal 246242
from an authorized
distributor/dealer.
TP-6079 3/00
Hardware damage. The engine and
generator set may use both American
Standard and metric hardware. Use
the correct size tools to prevent
rounding of the bolt heads and nuts.
When replacing hardware, do not
substitute
hardware.
246242
available in different hardness ratings.
To indicate
Standard hardware uses a series of
markings, and metric hardware uses a
numeric system. Check the markings
on the bolt heads and nuts for
identification.
Order
service
NOTICE
NOTICE
with inferior grade
Screws and nuts are
hardness, American
NOTICE
Canadian installations only.
standby service connect the output of
the generator set to a suitably rated
transfer switch in accordance with
Canadian Electrical Code, Part 1.
NOTICE
This generator set does not comply
with United States Coast Guard
(USCG) requirements and must not
be used for marine applications. For
marine installations use only generator
sets specified for marine use. USCG
Regulation 33CFR183 requires that a
generator set must be
protected when used
gasoline-fueled environment.
Safety Precautions and Instructions V
For
ignition
in a