Watchdog Timer - DFI SB600-C User Manual

Hide thumbs Also See for SB600-C:
Table of Contents

Advertisement

F71879 Super IO Confi guration
This section is used to confi gure the I/O functions supported by the onboard
Super I/O chip.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
F71879 Super IO Confi guration
Super IO Chip
Restore AC Power Loss

WatchDog Timer

Super IO WatchDog Timer
 Serial Port 1 Confi guration
 Serial Port 2 Confi guration
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Restore AC Power Loss
Off
When power returns after an AC power failure, the system's power is off. You
must press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically
power-on.
Last State
When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system's power
is off when AC power failure occurs, it will remain off when power returns.
If the system's power is on when AC power failure occurs, the system will
power-on when power returns.
WatchDog Timer
This fi eld is used to select the time interval of the Watchdog timer. If the
system hangs or fails to function, it will reset at the set time interval so that
your system will continue to operate.
Fintek F71879
[Power Off]
[Disabled]
10
BIOS Setup
Restore AC Power Loss
help.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
3
79

Advertisement

Table of Contents
loading

Table of Contents