Jumper Settings; Clear Cmos Data - DFI SB600-C User Manual

Jumper Settings

Clear CMOS Data

If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfi gure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP7 pins 2 and 3 to On. Wait for a few seconds and set JP7 back to its
default setting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
COM 2
COM 1
Hardware Installation
1 2 3
2-3 On:
Clear CMOS Data
1 2 3
JP7
1-2 On: Normal
(default)
2
27