Assembly Instructions - Viavito Onyx Owner's Manual

Assembly instructions

Attention:
Please follow these assembly instructions step by step to assemble this bike:
Step1
Attach the Front bottom tube (2) and Rear bottom tube (3) to the main frame (1) with
Carriage bolt (12), Arc washer (13) and Acorn nut (14).
Step 2
Lock the handlebar (5) to the main frame (1) with Allen bolt (23), arch washer (24) and
flat washer (22). Connect the sensor wire (19) and pulse wire (21) to the relevant
cables coming from the Meter (8), and then insert the meter to the bracket of the
handlebar (5).
- 5 -