Assembly Instructions - Viavito Onyx Owner's Manual

Assembly Instructions

Attention: Please follow these assembly instructions step by step
to assemble this bike:
Step One.
01 Attach the front stabiliser (2) and the
rear stabiliser (3) to the main frame (1),
using the carriage bolts (12) arc wash-
ers (13) and acorn nuts (14) which have
been pre-assembled onto the stabilis-
ers. Simply remove the pre-assembled
parts, slide the stabilisers onto the
main frame and tighten them with the
bolts, washers and nuts.
06
02 When both stabilisers have been at-
tached, stand the bike up, remove the
locking pin, unfold the bike and then
reinsert the locking pin.
www.viavito.com