Connections - Marantz Professional PMD325 User Manual

4. CONNECTIONS

This CD player is connected to an amplifier, CD recorder and
other components for use. To ensure that the components
are connected properly, refer to the instruction manuals that
come with the components to be connected.
Before connecting the components, be absolutely sure to turn
off their power.
Connecting to an amplifier
• Connecting the analog unbalanced
output connectors
Use the audio connecting cord to connect the player with a
stereo amplifier or AV amplifier. Do not connect the player to
the PHONO input connectors on the amplifier.
When making the connections, insert the plugs securely into
the connectors. Failure to insert the plugs securely may result
in noise.
BALANCED
R L
OUTPUT LEVEL
L
R
COAX.
ANALOG OUT DIGITAL OUT
(White)
(Red)
Audio connecting cord (supplied)
(Red) (White)
PHONO
GND
L
R
PHONO CD TUNER AUX PLAY
/DVD
CONTROL I/O RS232C
IN
DIGITAL OUT
(SPDIF)
OUT CONNECTION
1 GND
3
EXTERNAL INTERNAL 2 HOT (+)
2 1
OPT.
REMOTE CONTROL
3 COLD (-)
Signal flow
R
S P E A K E R S I M P E
L L IN
R R OUT
REC PLAY REC
PRE OUT REMOTE
CD-R MD/TAPE
CONTROL
Amplifier
• Connecting the ANALOG BALANCED
OUT (analog balanced output) connectors
Connect the unit to the stereo amplifier or AV amplifier using
XLR connector cables.
When making the connections, insert the plugs firmly into the
connectors. Failure to insert them securely gives rise to noise.
BALANCED
R
OUTPUT LEVEL
L
R
ANALOG OUT
PUSH
NEUTRIK
R
BALANCED
R -TRIM-
0 +22 0
(REF=+16dBu/0dBFS)
SPEA
L
CONTROL I/O RS232C
IN
OUT
EXTERNAL INTERNAL
COAX. OPT.
DIGITAL OUT REMOTE CONTROL
XLR connector cable
(available on the market)
Signal flow
ANALOG
DIGITAL
PUSH HOT(+) PUSH
GROUND
2 1
NEUTRIK NEUTRIK
3
COLD(-)
IN OUT
L
IN
L
IN
L
AES/EBU
R
+22
INPUT
SPDIF
IN
SELECT
(SPDIF)
Amplifier, CD recorder, etc.
DIGITAL OUT
(SPDIF)
CONNECTION
1 GND
3
2 1 2 HOT (+)
3 COLD (-)
LOOP
REMOTE
OUT
(RC5)
OUT
EXT.
INT.(IR)
OUT IN
7