Maytag MHN30PDCWW Installation Instructions Manual page 11

CODE
REGULAR CYCLE PRICE (Factory Default)
6 07
6 07 Represents the number of quarters (coin 1); may
adjust from 0–39. (See VALUE OF COIN 1.) Advance
from 0–39 by pressing the PERM PRESS button.
Factory default of 7 quarters = $1.75.
6 00 PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide
actuation.
Press the WOOLENS button once to advance
g
to next code.
7 11 WASH LENGTH
7 11 This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes.
Choose from 9–17 minutes by pressing the PERM
PRESS button.
g Press the WOOLENS button once to advance
to next code.
NOTE: This option does not apply to DELICATES
AND KNITS.
8 00 ADDITIONAL RINSE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
8 00 Not Selected 'OFF'.
8 Ar Selected 'ON'. Cannot be combined with the Super
Cycle rinse option.
Press the DELICATES AND KNITS button once for
this selection.
Press the WOOLENS button once to advance
g
to next code.
CYCLE COUNTER OPTION
9 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9 00 Not Selected 'OFF'.
9 0C Selected 'ON' and not able to be deselected.
Press the DELICATES AND KNITS button 3
consecutive times to select 'ON'. Once selected
'ON' it cannot be deselected.
g
Press the WOOLENS button once to advance
to next code.
1. 00 MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1. 00 Not Selected 'OFF'.
1. 0C Selected 'ON'.
Press the DELICATES AND KNITS button 3
consecutive times to select 'ON' and 3 consecutive
times to remove (Not Selected 'OFF'.) Counter resets
by going from 'OFF' to 'ON'.
1 C0 Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
first select 'ON', then within 2 seconds, press
the DELICATES AND KNITS button twice, PERM
PRESS button once, and exit the set-up mode.
g Press the WOOLENS button once to advance
to next code.
EXPLANATION
CODE
2. 00 SPECIAL PRICING OPTIONS
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
2. 00 Not Selected 'OFF', and next available code will be
A.00.
2. SP Selected 'ON'. Press the DELICATES AND KNIT
button once for this selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes '3.XX' through '9.XX'.
g Press the WOOLENS button once to advance
to next code.
Options to use if SPECIAL PRICING is selected:
SPECIAL CYCLE PRICE
3. 07
3. 07 Represents the number of quarters (coin 1);
may adjust from 0–39. (See VALUE OF COIN 1.)
Advance from 0–39 by pressing the PERM PRESS
button. Factory default of 7 quarters = $1.75.
3 00
PR MODELS ONLY: Factory default of 0 quarters.
g
Press the WOOLENS button once to advance
to next code.
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the PERM PRESS
button.
Press the WOOLENS button once to advance
g
to next code.
TIME-OF-DAY CLOCK, HOURS
6. 00
NOTE: Uses MILITARY TIME or 24 hr. clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the PERM PRESS
button.
Press the WOOLENS button once to advance
g
to next code.
SPECIAL PRICE START HOUR
7. 00
NOTE: Uses MILITARY TIME or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours. Select START
HOUR by pressing the PERM PRESS button.
g Press the WOOLENS button once to advance
to next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses MILITARY TIME or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours. Select STOP
HOUR by pressing the PERM PRESS button.
g Press the WOOLENS button once to advance
to next code.
EXPLANATION
11