Miele WT 2789 i WPM Operating Instructions Manual page 32

WASHING
d = Low water level
( = Medium water level
e = High water level
a = Intensive rhythm
b = Normal rhythm
c = Gentle rhythm
d = Sensitive rhythm
e = Ultra sensitive rhythm
f = Handwash rhythm
This machine has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
The display shows the stage the
programme has reached.
32
Special features in the programme
sequences:
Anti-crease:
At the end of the programme, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened and laundry
removed at any time during the
anti-crease phase.
1)
A second rinse is carried out when a
temperature of 60°C to 95°C has
been selected. A third rinse is
carried out when a temperature
below 60°C is selected.
2)
An third or fourth rinse is carried out
if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– No u has been selected.
3)
A third rinse is carried out if:
– No u has been selected.
4)
There is a spin only after the main
wash.
5)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate the pillows.
6)
Pre-wash: A pre-wash is carried out
automatically to remove dust.