Building Under A Continous Worktop / In A Kitchen Run - Miele WT 2789 i WPM Operating Instructions Manual

Building under a continous
worktop / in a kitchen run
N = Niche height (820-930 mm)
This machine is specially designed for
installation under a continuous worktop
run in a fitted kitchen.
It is supplied with a cover plate
instead of a machine lid.
The cover plate is necessary to
ensure electrical safety and must not
be removed.
The machine must not be used
without the front panel in place.
Installation and connection
– The slides* can be used to protect
the floor from damage when the
machine is pushed into position or
taken out for servicing.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
Niche height
820 mm
from 830 -
840 mm
from 870 -
885 mm
from 915 -
930 mm
* optional accessory
If the kitchen run has a continuous
furniture plinth in place, a gap must
be made for the washer-dryer.
Accessory
None required
Fit longer screw feet*
(Set to approx.
40 mm)
Use one raising kit*
Use two raising kits*
71