Jetmaster 500 Installation & Operating Instructions Manual page 17

5.10 Combustible materials should not be fitted closer than 200 mm to any
side of the barbecue box, or within 450 mm of the top of the barbecue
box, unless adequate provision is made to insulate such materials.
Fig. 8 - Installation of built-in barbecues
110 mm brickwork is
adequate if liners are
used
Moulded flue liners
Smoke gather
Seal joint with
fibreglass insulation
Electrical connection
Refer to Fig. 9 for
specific details
Concrete lintel
(essential)
Please read written instructions in conjunction with these diagrams.
Pre-stressed concrete lintels
if storage beneath
required
15
Fit Jetmaster cowl
(fixed or rotating)
Cement in position
Fibreglass insulation
up to 200 mm above
top of smoke gather
content page
Back to