hentech HT008C-P-T Instruction Manual

Enlarged version

Instruction Manual for LED Underwater Light HT008C-P-T

Manufacturer: Hentech Technology Development Co., LTD

Add: Xinmin Industrial Zone, Longzhou Road, Lunjiao Town, Shunde District,

Foshan City, Guangdong Province, China 528308

Telephone: +86-757-27332335/27332335/27332339

Fax: +86-757-27332330

Website: http://www.hentech.ca

IMPORTANT: This manual includes essential information on the safety measures to be

implemented for installation and start-up. Therefore, the installer, as well as the user,

must read these instructions before beginning installation and start-up.

Technical Specification

Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC)

Standard input watt:

RGB

18W

23W

30W

33W

21W

Use life: 60,000 hours

16 programs with Synchronization capability

Dimensions:

White

26W

33W

36W

Table of Contents

Do you have a question about the HT008C-P-T and is the answer not in the manual?

Page 1 Instruction Manual for LED Underwater Light HT008C-P-T IMPORTANT: This manual includes essential information on the safety measures to be implemented for installation and start-up. Therefore, the installer, as well as the user, must read these instructions before beginning installation and start-up.
Page 3 Chart of parts The below drawing shows how to connect the cable from the lamp to the power source. Tips: The LED bulb is fitting to PAR56 niches and can be used to replace the PAR56. Refer to the below picture. The parts marked with * are not included and needs to buy separately.
Page 4 Maintenance & Replacement Safety Warnings There is no maintenance required for this lamp ¨ it is designed to be used only once, meaning The persons who are in charge of installation should have the required qualifications for this type that replacement is necessary if it becomes defective (repairing is impossible). Before any of work.