hentech HT227C Instruction Manual

Instruction Manual for LED

Underwater Light HT227C

IMPORTANT:

This manual includes essential information on the safety measures to be implemented for

installation and start-up. Therefore, the installer, as well as the user, must read these instructions before

beginning installation and start-up.

Technical Specification

Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC)

Standard input watt:

RGB

White

18W

21W

Use life: 60,000 hours

16 programs with Synchronization capability

Dimensions:

Table of Contents

Do you have a question about the HT227C and is the answer not in the manual?

Page 1 Instruction Manual for LED installation and start-up. Therefore, the installer, as well as the user, must read these instructions before beginning installation and start-up. Underwater Light HT227C Technical Specification Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC) Standard input watt:...
Page 3 Maintenance & Replacement Cable Connection There is no maintenance required for this lamp it is designed to be used only once, meaning that replacement is necessary if it becomes defective (repairing is impossible). Before any handling, ensure that there is NO voltage supplied to the lamp. To replace, unfasten the lamp from the bracket.
Page 4 Safety Warnings The persons who are in charge of installation should have the required qualifications for this type of work. " Avoid making contact with the electric voltage. " Comply with the current standards regarding accident prevention. " IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS, SPECIAL WIRING, SWIMMING POOLS.