hentech HT028C-T Instruction Manual

Table of Contents

Download this manual

Enlarged version

Instruction Manual for HT028C-T LED Underwater Light

Manufacturer: Hentech Technology Development Co., LTD

Add: Xinmin Industrial Zone, Longzhou Road, Lunjiao Town, Shunde District,

Foshan City, Guangdong Province, China 528308

Telephone: +86-757-27332335/27332338/27332339

Fax: +86-757-27332330

Website: http://www.hentech.ca

IMPORTANT: This manual includes essential information on the safety measures to be

implemented for installation and start-up. Therefore, the installer, as well as the user,

must read these instructions before beginning installation and start-up.

Technical Specification

Standard input voltage: 12V AC/DC (Range: 12~18V AC or DC)

Standard input watt:

RGB / White

6W / 7W

Use life: 60,000 hours

16 programs with Synchronization capability

Dimensions:

Table of Contents

Do you have a question about the HT028C-T and is the answer not in the manual?

Page 1 Instruction Manual for HT028C-T LED Underwater Light IMPORTANT: This manual includes essential information on the safety measures to be implemented for installation and start-up. Therefore, the installer, as well as the user, must read these instructions before beginning installation and start-up.
Page 2 Packing Contents 8. Evening sea: slow animation red/blue The following items are included inside the box: 9. Evening rivers: slow animation red/green Lamp Assembly x 1 10. Riviera: slow animation green/blue Plastic Nut x 1 11. White: neutral white Rubber Ring x 3 12.
Page 3 Maintenance & Replacement There is no maintenance required for this lamp ¨ it is designed to be used only once, meaning that replacement is necessary if it becomes defective (repairing is impossible). Before any handling, ensure that there is NO voltage supplied to the lamp. The light is designed to be replace without cutting any cable.
Page 4 Safety Warnings The persons who are in charge of installation should have the required qualifications for this type of work. ? Avoid making contact with the electric voltage. ? Comply with the current standards regarding accident prevention. ? IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS, SPECIAL WIRING, SWIMMING POOLS.