Battery Status Icons - GSE 675 Technical Reference Manual

b. If the battery does not pass the diagnostics, the "FAST CHARGE" indicator light will continue to
blink. Inspect the battery connector to ensure good contact. If the red LED continues to blink
replace the battery.
7. The battery is completely charged when the "FAST CHARGE" red LED turns off, and the green LED
indicator labeled "CHARGE COMPLETE" turns on. Battery charge is complete when any of the following
conditions is met:
a. The battery reaches the full charge voltage.
b. The battery temperature is high enough to indicate the battery is charged.
c. If the battery voltage drops slightly, a characteristic of the NiMH batteries, also an indication to
the Model 672/675 that the battery is charged.
B S
ATTERY TATUS
The rechargeable batteries will show different battery states during charging and discharging.
N B O
O ATTERY PTION
The charging board is physically not installed or recognized. No graphic will be displayed.
B D
ATTERY ISCHARGING
The battery icons will run through a succession of animation from 100% to 0%.
100 % 75 %
B D
ATTERY ISCONNECTED
Once the battery is disconnected, the current battery icon will disappear.
C P
HARGE ENDING
The Model 675 has been plugged into a power outlet. This only appears for a few seconds when AC power
is applied.
C B
HARGING ATTERY
The battery icons will run through a succession of animation from 0% to 100%.
0 % 25 %
F C
ULLY HARGED
The display will show a battery icon of 100%.
2-4
Chapter 2
I
CONS
I
NSTALLED
50 %
50 %
25 % 0 %
75 % 100 %
Option Installation